Panasonic AGDVX100 - DV CAMCORDER Налаштування - Сторінка 15
Переглянути онлайн або завантажити pdf Налаштування для Відеокамера. Panasonic AGDVX100 - DV CAMCORDER. Panasonic AGDVX100 - DV CAMCORDER 42 сторінки. Panasonic ag-dvx100b: quick start
Також для Panasonic AGDVX100 - DV CAMCORDER: Посібник з програмного забезпечення (11 сторінок), Брошура та технічні характеристики (12 сторінок)
Друкувати сторінку
As was explained the scene files are set to factory defaults, but they may be also tailored to
your various shooting conditions and stored in the menu memories and you may select
them with a six position rotary dial (cine switch), located at the back of the camcorder.
Item
DETAIL LEVEL
CHROMA LEVEL
CHROMA PHASE
COLOR TEMP
MASTER PED
A IRIS LEVEL
GAMMA
SKIN TONE DTL
MATRIX
V DETAIL FREQ
PROGRESSIVE
NAME EDIT
SAVE / INIT
Detail Level
Changing the detail level will affect the whole picture, this adjustment will
allow you to increase or decrease the overall Horizontal and Vertical detail in the picture.
Chroma Level
Changing the Chroma Level allows you increase or decrease the amount
of color that is in the video image.
Chroma Phase
Changing the Chroma Phase allows you to change the phase of the color
(tint) of the video image. Keep in mind that this adjustment is a fine adjustment.
Color Temp
Color temperature is determined at the temperature when carbon is heated
up and emits a light which has a certain spectral response. For example, at 3000 degrees
Celsius carbon black emits a light. The color temperature of that light is said to be 3200
Kelvin (3000 Celsius equals 3200 Kelvin). Color temperature generally expresses chroma-
ticity of a source of light such as indoor or outdoor light. For example, if the temperature is
relatively low, the light appears reddish. As the temperature increase, the light changed
from red to orange to yellow to white. So when a camera is used with light whose color
temperature is other than 3200K, use the appropriate color temperature conversion filter or
setting. The color Temp setting allow you to finely adjust the color temperature, after the
white balance has been adjusted.
Settings
-7 to +7
-7 to +7
-7 to +7
-7 to +7
-15 to +15
-4 to +4
CINE-LIKE, LOW, NORM, HIGH
ON / OFF
NORM, FLOU, CINE-LIKE
THIN / THICK
OFF, 30P, 24P, 24(ADV)
NAME
SAVE INITIAL
15
Default
See Page 14 for
all actual Factory
Defaults settings