Olympus Camedia D-390 Посібник із швидкого старту - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Цифрова камера Olympus Camedia D-390. Olympus Camedia D-390 2 сторінки. D-390 quick start guide - spanish (312kb)
Також для Olympus Camedia D-390: Посібник із швидкого старту (2 сторінок), (Короткий посібник для початківців (2 сторінок), (Короткий посібник для початківців (2 сторінок)
Друкувати сторінку
TAKING PICTURES
There are two ways to compose your subject: with the
viewfinder or using the monitor. Depending upon the shooting
situation, there may be advantages to each method. Please
refer to the printed Basic Manual for more information.
a.
Taking a Picture with the Viewfinder
• Open the lens barrier fully.
• Frame your subjects using the
AF target mark in the viewfinder.
• Press the shutter button halfway.
The digital camera confirms the focus and exposure are
properly set when the green lamp in the viewfinder lights
steadily. The orange lamp informs you that the flash is
recommended and/or recharging (when blinking); or ready
to fire (when steady).
• Press the shutter button completely to take the picture.
A short beep confirms your picture has been taken.
b.
Taking a Picture with the Monitor
•
Open the lens barrier fully.
• Press
and then frame your subject using the full-color
monitor.
P P
HQ 1600
HQ
1600 x x 1200
1200
VIEWING AND ERASING
PICTURES
With this digital camera, you can easily view the photos
you want—and delete the ones you don't.
a.
Viewing Pictures
There are two ways to access the Playback mode:
If the camera is OFF and the lens barrier closed,
•
press
once.
OR
If the camera is in the shooting mode with the lens
•
barrier fully open, press
twice in rapid succession
(Quick View).
The last picture taken appears in the monitor. Use
to scroll though all the images saved on your
xD-Picture Card.
CONNECTING THE CAMERA
TO A COMPUTER
TIP:
Olympus recommends using the optional E-7AC AC adapter to ensure
a consistent power supply when downloading images.
Make sure that the camera is turned off before
connecting it to your computer.
Olympus makes it simple to connect this digital camera to your
computer.
• Turn the camera off.
• Plug the supplied USB cable into the ports on your camera and
computer as illustrated at right.
INSTALLING THE CAMERA
SOFTWARE
You've now mastered the basic functionality of your new Olympus
digital camera! You are now ready to begin exploring the
possibilities that digital photography brings to your computer.
Activities such as photo editing, printing, and much more are
only steps away!
About the Olympus CAMEDIA Master CD-ROM
Your Olympus digital camera comes bundled with a suite of software and
documentation. The CD includes:
• CAMEDIA Master : To download pictures from the camera, view,
organize, retouch, and print your digital photos and movies.
• USB Driver for Windows 98: This utility must be installed to allow the
camera to communicate with your computer if it uses the Microsoft Windows 98
operating system.
• Olympus
Digital
Camera Reference Manual: A complete
reference guide in digital form, saved on the CD in PDF format.
You are now ready to install the computer software.
• Open the CAMEDIA Master CD-ROM package and locate the Software
Installation Guide in the language you wish to use.
•
Continue to follow the step-by-step instructions for installing the software, and
enjoy your new digital photo processing capabilities!
Icons representing camera settings appear on the
monitor, telling you important information such as the
Flash and record modes, battery life, and the number
of frames remaining.
• Press the shutter button halfway. The green lamp
will light steadily when the focus and exposure
Orange lamp
are set.
• Press the shutter button completely to take the
picture. A short beep confirms your picture has
been taken.
Green lamp
c.
Zooming
You can enlarge your subject when shooting by 1.3,
1.6, 2.0 or 2.5 times.
Each time you press
in the following sequence:
1.3 times ➝ 1.6 times ➝ 2.0 times ➝ 2.5 times.
Each time you press
in the following sequence:
2.5 times ➝ 2.0 times ➝ 1.6 times ➝ 1.3 times.
• The zoom magnification changes continuously
while holding down
When you are finished reviewing your pictures:
•
Press
to turn the camera off.
OR
•
To return back to the shooting mode, press the shutter
button halfway.
b.
Erasing Pictures
The beauty of digital photography is your ability to keep
the photos you want, delete the rest, and reuse empty
memory space to take new pictures. This digital camera
offers two ways to permanently erase unwanted digital
photos:
Single-Frame Erase: Deletes only the picture currently
displayed in the monitor.
Once erased, pictures cannot be restored.
Windows 98 users must install
the "USB Driver for Windows 98"
software before connecting this
digital camera to the computer.
Refer to the Software
Installation Guide for complete
information.
Press the
button if the camera does not turn on
•
automatically. The camera starts communicating with the PC.
d.
Flash Modes
This digital camera features multiple flash modes.
Icon
No icon Auto-flash
Press
shutter button depressed halfway, the flash is ready to fire when
the orange lamp next to the viewfinder lights steadily. When the
, the zoom magnification changes
orange lamp is blinking, the flash is charging.
e.
Number of Storable Pictures
Your digital camera can handle xD-Picture Card from 16 MB to
256 MB. The number of storable pictures depends on the image
quality selected.
See the Reference Manual for complete descriptions of each
record mode and the storable frame capacity for the various
, the zoom magnification changes
resolution modes and xD-Picture Card capacities.
TIP:
the number in the lower right corner. Remember, you can always delete unwanted
or
.
pictures to make room for more. (See Step 5.)
•
• Press
• Press
TIP: Images can also be erased while in the "Quick View" mode
described in step 5A. This makes it easy to quickly erase a picture that
you just took.
All-Frame Erase: Deletes all pictures on the xD-Picture Card in one
operation, except for pictures you have protected.
• With the lens barrier closed, press
• Press
• Use
• ALL ERASE should be highlighted. Press
• As a safeguard, this digital camera will ask you to select
Additional Camera Features
This digital camera offers a host of advanced features to expand your creativity. Here's just a small
sampling. See the Basic Manual for details on these capabilities, and more!
• 4 Scene Program Shooting Modes: This camera has 4 shooting modes to choose from
depending on the shooting conditions and the effect you want to achieve.
• Macro Mode: For close-ups as tight as 8 inches, select Macro Mode.
• Movie Mode: Yes, this digital camera records movies! (Movie Mode does not record sound.)
• Two-in-one Pictures: Combine two separate images taken in succession and store them as a
single picture.
• Close-up Playback: Enlarge the pictures in the monitor to check details of the selected image.
• Index Display: View several thumbnail pictures on the monitor at once.
• Protecting Pictures: Prevents you from accidentally erasing photos.
• Video Playback: View your pictures and movies on a television monitor.
• Panorama Shooting: Connect overlapping images into a single picture using the panorama
mode and Olympus CAMEDIA Master software.
TIP: Remember to complete and return your Registration Card, and keep all camera documentation handy.
Technical Support (USA)
European Technical Customer Support
1-888-553-4448 (Toll-free)
00800-67 10 83 00 (Toll-free)
8:00 AM - 10:00 PM ET
+49(0)1805-67 10 83 or +49(0)40-23 77 38 99 (Charged)
Monday - Friday
9:00 AM - 6:00 PM MET
Monday - Friday
Flash Mode
Description
The camera automatically decides if the flash is needed.
Red-eye
Reduces incidence of red-eye by emitting pre-flashes to
Reduction
shrink pupil size before firing the main flash. The strobe
Flash
effect is normal operation for this mode.
Fill-in Flash
The flash always fires with every picture.
Turns the flash off for times when flash photography is
Flash Off
prohibited or not desired. The flash never fires.
(
) to cycle through the available flash modes. With the
To find out how many frames you have left, turn on the monitor and look for
With the lens barrier closed, press
and use the arrow
pad to display the picture you want to erase.
. Press
to select
.
to select YES, and then press
Once erased, pictures cannot be restored.
.
, then press
to select MODE MENU.
to select the CARD tab, then press
the CARD SETUP screen.
YES or NO to confirm erasing, as this process permanently
deletes all unprotected pictures. Select YES and press
USB
USB
.
twice to access
.
.