Alphasonik APP122 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Сабвуфер Alphasonik APP122. Alphasonik APP122 16 сторінок.

Controls & Functions

9. Low Pass Filter Control

Adjust the variable crossover frequency with control knob as desired. The amplifier input

circuit filters out everything above 40Hz - 200Hz (dependent on the adjustment of the

frequency control), so only the lowest bass notes are amplified.

10. Bass Boost Control

Bass Boost Control increases from 0dB to +12dB

11. Remote Bass Knob Port

Mounting and Installation

1. Using the screws provided with the kit, find a location under the dash, center console,

or a place that gives easy access to the remote bass boost knob.

2. Plug in the supplied cord into the back of the bass boost knob.

Adjusting the Level

To adjust the level setting, first turn the amplifier gain all the way down. Then turn the

source volume up until distortion is audible, and then turn it down until distortion is inau-

dible. Next, turn the amplifier level setting until once again distortion is audible, and then

back it down until distortion is inaudible.

LPF

200

BASS

BOOST

REMOTE