Accurate Technology 700-1600-240 Посібник із швидкого старту - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Вимірювальні прилади Accurate Technology 700-1600-240. Accurate Technology 700-1600-240 17 сторінок. Flush mount readouts

Друкувати сторінку

Programming Mode:

Many features of the readout can be customized, plus additional tools can be

configured using the programming menu. Consult the Complete User Guide at

www.proscale.com

saving customized settings.

Before making changes, open the readout case and verify the programming

menu is accessible. The jumper to the left of the battery has three pins. Ensure

pins 1 and 2 are connected with a shunt before proceeding. (After making

changes, you can move the shunt to pins 2 and 3 to prevent further

programming changes.)

To start the programming menu, turn on the readout.

1. Press and hold the UNITS key.

2. Quickly press and release DATUM key. You will see PG on, then Pr1.

3. Release the UNITS key.

4. After a moment, the value for Pr1 will display.

•

Change the parameter value using the PLUS or MINUS keys.

•

Default the parameter value using the DATUM key.

•

Advance to next parameter by pressing the UNITS key.

•

Exit programming menu following steps 1-3 above (OR wait 30

seconds). Note: Changes made are immediately active.

Parameter

number

Pr1

Pr2

Pr3

Pr4

Pr5

Pr6

Pr7

Pr11

Pr12

Manual Part # 800-1403-001 Revision 06-01-2020

for more information about accessing, changing, and

What it does

Sets the value that is displayed when

DATUM key is pressed.

0 = numbers increase when encoder

moves right

1 = numbers decrease when encoder

moves right

0 = PLUS, MINUS, and DATUM keys

are operative

1 = These keys are locked out.

Value controls the resolution for

decimals.

How much motion is needed to wake

up the readout.

Controls if fractions round up or down.

Controls resolution of 4

(in inches)

Controls which units modes appear.

Auto-off timer (in minutes)

decimal place

Default value

0.000

0.004 inches

0 (round down)

1 (.0005"

resolution)

0 (All units)

Page 11 of 16