Axvue E600 Інструкція з експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Радіоняня Axvue E600. Axvue E600 12 сторінок. Video baby monitor with 2.4" lcd screen and night vision

Друкувати сторінку

Setup & use (continued)

Step 1: Place the monitors in the rooms from which you want to monitor your baby (ie., living room

or bedroom). Plug the monitor AC adapters into the AC adapter jacks and other ends into

standard electrical outlets.

Step 2: Press and hold POWER/MENU button for 5-seconds to power up until the AXVUE logo or

video appears on screen.

Step 3: For audio and no video, press the VIDEO ON/OFF button top of the unit.

Step 4: To turn the monitor oﬀ completely, press and hold the POWER/MENU button for 5-seconds.

Before using the monitor, charge the battery for 6-8 hours.

Step 1: Charge the battery for 4 hours at least, before using the monitor in portable mode.

Step 2: Make sure the monitor adapter is plugged into the monitor, camera adapter is plugged into

the camera, as they are shown on the body.

Step 3: The battery life can be up to 6-hours if charged overnight.

Battery life will be weaken if recharging constantly. Charge the battery after the indicator is shown.

Remove battery if long time of non-use, or exhausted.

The monitor and the camera are paired prior to the shipment. If the monitor

and camera are found not paired for some reason, follow steps below:

Step 1: Make sure the monitor is at the same area as the camera.

Step 2: Keep the camera powered oﬀ.

Step 3: Press Power/VIDEO

OK/Menu button

Right/Zoom In

which is show as below . Select ADD CAM icon

an availabe number and press OK/menu

wireless connecting icon is shown.

Press 5 second

to power on.

Step 4: Power on the camera within 8 seconds.

Step 5: Wait 3 seconds, the red LED will stop ﬂashing once paired successfully, and video will appear.

PAGE 5

TO USE PLUGGED-IN

TO USE PORTABLE / BATTERY MODE

TO PAIR MONITOR AND CAMERA ( ADD A CAMERA )

button for 5 second to power on the monitor. Then press

, highlight camera option

button, press the OK/menu

OFF

by using Left/Temperature mode

button to enter the camera options menu

, press OK/menu

button to start pairing, the red LED will ﬂash and

button to camera list, select

Red LED will ﬂash