Epson ActionLaser 1400 Посібник користувача - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник користувача для Принтер Epson ActionLaser 1400. Epson ActionLaser 1400 30 сторінок. Flatbed inkjet printer
Також для Epson ActionLaser 1400: Посібник користувача (8 сторінок), Прочитайте цей перший посібник (27 сторінок)
Друкувати сторінку
Flatbed Inkjet Printer
b、 Press the button of "input", please
stop moving of the flatbed when the
printing object on flatbed has moved
to the underside of the gauge。
c 、 Press the key" up" to let the
flatbed reach to the best position as
image right:
d、press the key"input" and make
the flatbed to move to the button side of the flatbed(When the Flatbed has moved to the button side
of the space, the LED Lamp would be shut down automatic)。
Note:
When we print the transparency media (such as crystal), please put the object under "the
ram-proofer" , make the flatbed move up, and when the flatbed has reached to "the ram-proofer",
the flatbed would be parked to the best position for printing, in this situation, you can input the
flatbed.
About "the ram-proofer": during printing, if the flatbed has automatic moved down, at this time
"the ram-proofer" has been dilapidated, please open the rear window of the printer to maintain the
printer, at this time, you can get the solution by closing the "the ram-proofer" by the note information
which be listed on the machine.
Alarm：
The media on flatbed must be placed on the starting position of the flatbed, unless, in the next
operation, the printer might not be able to inspect to the real height of the media, and, if the flatbed
has moved up in abnormal situation, it would lead to hard damage to the printer and media.
For something of the object with uneven surface, you are required to adjust the media
height by manual model, to set the printing object with distance to print-head at 1.50mm. in by
automatic printing model to adjust the height of the printer, it might has destroy to the printer.
Two, Close the printer
Please close the printer before the all jobs about printing has been done, and you
Have to press the key of "connect" on panel, wait for the LED Lamp "online" to be closed, and the
print-head will come back to initialized position (in the quiet circumstance, there might have some
noise of movement about the print-head)。
Note：
1．Please do not cut the power of the printer before the print-head did not come back to initialized
position.
2．Please ensure the print-head has come back to initialized position, for the long distance moving,
please fix the print-head by the protection paper。
Alarm：
1．Please don't attempt to repair this printer on your own, and don't update this printer on
your own, there have a protecting label on the print-head & motherboard, if broken, we will
not perform the maintaining job. If there have something as situation for being blocked,
１５
１５