Epson AcuLaser C8500 Короткий довідник - Сторінка 17

Переглянути онлайн або завантажити pdf Короткий довідник для Принтер Epson AcuLaser C8500. Epson AcuLaser C8500 21 сторінка. Epson aculaser c8500: quick start
Також для Epson AcuLaser C8500: Інструкція з розпакування (20 сторінок)

Друкувати сторінку

Messages

Description

The waste toner collector is not

installed, or is installed incorrectly. If

there is no waste toner collector

installed, install one into the printer.

If there is a waste toner collector

already installed, try removing it

and reinstalling it.

This message means that the printer

cannot communicate with the

installed optional interface card.

Turn off the printer, remove the

card, then reinstall it.

Either the optional Hard Disk Drive is

damaged or it cannot be used with

this printer. Turn off the printer and

remove the Hard Disk Drive.

An optional PostScript 3 ROM

module that cannot be used on this

printer is installed. Turn off the printer

and remove the module.

The printer cannot read the

installed optional ROM module.

Turn off the printer and remove the

ROM module.

If you try to print on media of overly

high density, the printer stops

loading the media to prevent

printer damage. In this case, you

need to clear any jammed media

from the MP tray or the paper path

unit.

Messages

Description

The location where the paper jam

occurred is displayed at xxxx.

xxx represents an alphabet that

indicates the location of the error.

If a paper jam occurs at two or

more locations simultaneously, the

corresponding multiple locations

are displayed.

For more information, See

"Clearing Jammed Paper" on

page 6.

: The selected paper source is

indicated.

: The selected paper size is

indicated.

The printer is waiting for media to be

inserted manually.

The printer has insufficient memory

to execute the current task. To

correct the error, press the

Continue button on the control

panel.

This message appears if you try to

change the printer's settings

through the control panel when the

buttons are locked. You can unlock

them by using the EPSON WinAssist

utility or WebAssist. Refer to the

Administrator's Guide for

Administrator's Guide

information.