Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer Посібник користувача - Сторінка 18
Переглянути онлайн або завантажити pdf Посібник користувача для Принтер Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer. Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer 28 сторінок. User guide - remote configuration manager
Також для Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer: Технічні характеристики (2 сторінок), Оновлення прошивки (1 сторінок), Посібник користувача (15 сторінок)
Друкувати сторінку
Button/Light
Function
l
Pause button
Stops printing temporarily, and resumes printing when pressed
again.
Pause light
On when the printer is paused.
Flashes when the print head overheats.
m
Paper Out light
On when the printer is out of paper.
Flashes when paper jams or the printer fails to eject paper.
Selecting a Font and Pitch
Usually, you use your application program to select the font and pitch you want
to use in a document. If necessary, however, you can select one of the printer's
fonts (in different pitches) with the buttons on the printer's control panel, as
described below. (The settings you make in application programs usually
override settings you make from the printer's control panel.) The pitches
available depend on the font you select:
Font
High Speed Draft
Draft
Roman
Sans Serif
1.
Make sure that the printer is not printing. If it is, press the
stop printing.
2.
Press the
button. The first available font is displayed on the LCD.
Font
Press the
button until you see the font you want to use. The LCD
Font
returns to its original state in a few seconds and the font you selected is set.
3.
Press the
button. The first available pitch is displayed on the LCD.
Pitch
Press the
button until you see the pitch you want to use. The LCD
Pitch
returns to its original state in a few seconds and the pitch you selected is set.
18 Selecting a Font and Pitch
Pitch
10, 12, 15, 17, 20
10, 12, 15, 17, 20, Proportional
10, 12, 15, 17, 20, Proportional
10, 12, 15, 17, 20, Proportional
Pause
Changing the Printer's Default Settings
While you can change many printer settings through your application software
or the printer driver, there are other printer functions you can control as follows:
Using the Epson Remote Configuration Manager on the printer software
CD-ROM. (See page 8.)
Using the printer's control panel to access SelecType mode and Default-
setting mode
For instructions on using the Remote Configuration Manager, see the on-screen
Remote Configuration Manager User's Guide, installed when you installed your
printer software. (See page 8.) To use SelecType, follow the instructions below.
For Default-setting mode, see page 20.
Using SelecType Mode
The table below lists the settings available in SelecType mode.
Setting
Language
Print settings
Page length for rear tractor
button to
Page length for front tractor
Skip over perforation
Line spacing
Left margin
Right margin
Platen gap
Auto tear off
Auto line feed
Print direction
Options (default in bold)
English, French, German, Italian, Spanish,
Portuguese
Press the SetD (Top of Form) button to print all
current settings.
3 inches, 3.5 inches, 4 inches, 5.5 inches, 6 inches,
7 inches, 8 inches, 8.5 inches, 11 inches,
70/6 inches, 12 inches, 14 inches, 17 inches
3 inches, 3.5 inches, 4 inches, 5.5 inches, 6 inches,
7 inches, 8 inches, 8.5 inches, 11 inches,
70/6 inches, 12 inches, 14 inches, 17 inches
Off, On
1/6 inch, 1/8 inch
0 column to 80 columns
1 column to 136 columns
Auto, 0 to 15
Off, On
Off, On
Bi-D, Uni-D