Architectural Area Lighting SC4 Інструкція з монтажу Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Зовнішнє освітлення Architectural Area Lighting SC4. Architectural Area Lighting SC4 16 сторінок.

Друкувати сторінку

INSTALLATION INSTRUCTIONS

FIXTURE INSTALLATION
1) MUST FOLLOW INSTALLATION
INSTRUCTION DRAWING #A96436
BEFORE PROCEEDING.
2) TURN OFF POWER.
3) ADJUST FIXTURE HEAD TO THE DESIRE POSITION
AND SECURE WITH (2) BUTTON HEAD SCREWS.
4) MAKE WIRE CONNECTION FROM FIXTURE TO POLE.
(NOTE: ASSEMBLY MUST BE GROUNDED TO
INCOMING EQUIPMENT GROUND SUPPLY).
5) SLIP FITTER OVER TOP OF POLE AND SECURE
FITTER WITH (6) STAINLESS SET SCREWS.
LAMP INSTALLATION
6) TO INSTALL LAMP, INSERT FINGERS INTO
SLOTS AND PULL BOTH LATCHES
BACK SIMULTANEOUSLY.
7) OPEN THE BOTTOM HALF HOUSING
AND INSTALL PROPER LAMP
(BY OTHERS). CLOSE
BOTTOM HALF HOUSING.
SERVICING BALLAST
8) LOOSEN BOTH SCREWS AND ALLOW
BALLAST TRAY TO HANG DOWNWARD.
9) SERVICE BALLAST.
10) CLOSE BALLAST TRAY AND SCREW
BACK ON TO THE UPPER HOUSING.
16555 East Gale Avenue
City of Industry, CA 91745
(626)968-5666
FIXTURE HEAD
(2) BUTTON
HEAD SCREWS
TWIN STRAIGHT ARMS
CATALOG NUMBER
TSS / TLS
LATCHES
SEE NOTE #6 & #7
SEE NOTE #8 THRU #10
BALLAST TRAY
(6) STAINLESS SET SCREWS
WIRE CONNECTORS (BY OTHERS)
DATE
APPRVD
DATE
REV.
10/20/2005
A
PART NO.
A96269