Digisol DG-GS4200 Series Посібник з монтажу - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник з монтажу для Перемикач Digisol DG-GS4200 Series. Digisol DG-GS4200 Series 19 сторінок. Giga layer 2 switches
Друкувати сторінку
good air circulation.
Caution!
The brackets are used to fix the switch on the rack. They can't serve as a bearing.
Please place a rack shelf under the switch. Do not place anything on top of the switch. Do
not block the blowholes on the switch to ensure the proper operation of the switch.
2.3.2 Connecting Console
DG-GS4200 series provide a RJ45 serial console port.
The connection procedure is listed below:
1.
Find the console cable provided in the accessory kit. Attach the RJ45 end to console
port of the switch.
2.
Connect the other side of the console cable to a character terminal (PC).
3.
Power on the switch and the character terminal. Configure the switch through the
Fig 2-2 Fasten the Switch to the Rack
Fig 2-3 Connecting Console to switch
2-7
DG-GS4200 Installation Guide