Sharp Notevision XG-C430X Посібник з налаштування - Сторінка 24

Переглянути онлайн або завантажити pdf Посібник з налаштування для Проектор Sharp Notevision XG-C430X. Sharp Notevision XG-C430X 45 сторінок. True xga portable lcd projectors
Також для Sharp Notevision XG-C430X: Технічна специфікація (2 сторінок), Технічні характеристики (2 сторінок), Технічні характеристики (2 сторінок)

Controlling the Projector via LAN

After connecting the projector to your network, enter the projector IP address in "Address"

on Internet Explorer (version 5.0 or later) using a computer on the network to start a setup

screen that will enable control of the projector via the network.

Controlling the Projector

Using Internet Explorer

(Version 5.0 or later)

Complete connections to external equipment

before starting the operation. (See pages 21-

29 of the projector's operation manual.)

Complete the AC cord connection. (See page

30 of the projector's operation manual.)

Note

• When connecting the projector to the LAN, use

a LAN cable (Category 5). When connecting the

projector to a hub, use a straight-through cable.

Start Internet Explorer (version 5.0

or later) on the computer.

Enter "http://" followed by the

projector IP address set by the

procedure on page

by "/" in "Address", and then

press the "Enter" key.

• The factory default setting for the

projector : "DHCP Client" is "Off" and IP

address is "192.168.150.2". If you did

not change the IP address in "3. Setting

up a Network Connection for the

Projector" (pages 22-23), enter "http://

192.168.150.2/".

A screen for controlling the pro-

jector appears, ready for per-

forming various status condi-

tions, control, and settings.

-24

followed