Accutone Alpha 1100 series Посібник з монтажу та інструкція користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з монтажу та інструкція користувача для Підсилювач Accutone Alpha 1100 series. Accutone Alpha 1100 series 10 сторінок. Apollo series telephony & multimedia amplifier

Друкувати сторінку

telephone communication.

II.1

Series 1100 in action! Comfort & Convenience.

II.1.2 Using Headset with Computer

Switch to Computer

position through the Telephone/Computer

Application Switch. Select Headset

position from the Headset/Handset

Application Switch for using headset. When a phone call comes in or you

want to make a call but during your computer work, simply switch to

Telephone

position and lift the handset from the cradle or press the

Speaker-phone button. By selecting Computer

handset back to its cradle or turn off the Speaker-Phone button, you can

return to your existing computer work.

PC LINE OUT

PC LINE IN

II.2. Troubleshooting

problem

There is no response

from the unit.

position and place the

I cannot hear any dial

tone or my caller

speaking to me on the

other side.

Series 1100

Telephony Multimedia Amplifier

My Caller cannot

hear me at all or

cannot hear me very

well.

I hear my voice too

loud and there is a

Mute

squealing sound.

Accutone

When using with my

computer, the sound

is too loud even

though the volume is

set at minimum.

part 2. begin to operate.

troubleshooting.

II.2

Series 1100 in action! Comfort & Convenience.

items to check

Check if the batteries are too low, replace if required.

Check if the Polarities of batteries are placed correctly .

Make sure the On/Off switched to ON.

Check if the Configuration Switch is properly selected.

Volume Control and Mute button are adjusted properly.

Headset/Handset and Telephone/Computer switches are

properly selected.

Check if the telephone patch cable is properly connected.

Check if the Telephone/Computer switch is selected at

telephone.

Make sure the Configuration Switch is properly selected.

Try other positions until your hear okay.

Make sure the Mute button is not pressed down.

Use the screwdriver to check if Mic volume is set too low.

Try to select the proper settings with the configuration

switch.

The rotary transmit Mic volume control is set too high.

Reduce this volume or refer to section I.3.3.

Take a look at the connection on your computer where the

cables connect with the 1100 amplifier. There should be 3

jacks (line-in, line-out and speaker).

Make sure the line-out cable from the amplifier is

connected to the line-in jack of the computer.

Make sure that the line-in cable from the amplifier is

connected to the line-out jack of the computer and NOT

the speaker jack.