Samsung 2243WM - SyncMaster - 22" LCD Monitor Посібник із швидкого старту - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Монітор Samsung 2243WM - SyncMaster - 22" LCD Monitor. Samsung 2243WM - SyncMaster - 22" LCD Monitor 19 сторінок. Quick guide (korean)
Також для Samsung 2243WM - SyncMaster - 22" LCD Monitor: Посібник із швидкого старту (23 сторінок), (Короткий посібник для початківців (24 сторінок), (Короткий посібник для початківців (20 сторінок), Короткий посібник (корейською мовою) (22 сторінок)

Check the volume level.

If the volume is still too low after turning the control to its maximum, check the volume control

on the computer sound card or software program.

Check when MagicTune™ does not function properly.

MagicTune™ feature is found only on PC (VGA) with Window OS that supports Plug and Play.

To check whether your PC is available for MagicTune™ feature, follow the steps below (When

Windows is XP);

Control Panel → Performance and Maintenance → System → Hardware → Device Manager

→ Monitors → After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching

new Hardware.

MagicTune™ is an additional software for the monitor. Some graphic cards may not support

your monitor. When you have a problem with the graphic card, visit our website to check the

compatible graphic card list provided.

http://www.samsung.com/monitor/magictune

MagicTune™ doesn't work properly.

Have you changed your PC or video graphic card?

Download the latest program. The program can be downloaded http://www.samsung.com/mon-

itor/magictune

Did you install the program?

Reboot the computer after installing the program for the first time. If a copy of the program is

already installed, remove it, reboot the computer, and then install the program again. You need

to reboot the computer for it to operate normally after installing or removing the program.

Note

Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.

Check if the power cord and the video cables are properly connected to the computer.

Check if the computer beeps more than 3 times when booting.

(If it does, request an a service for the main board of the computer.)

If you installed a new video card or if you assembled the PC, check if the installed the adapter(video)

driver and the monitor driver.

Check if the scanning ratio of the video screen is set to between 56 Hz ~ 75 Hz.

(Do not exceed 75 Hz when using the maximum resolution.)

If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove

the Display Adapter in the "Control Panel → System → Device Administrator" and then reboot the

computer to reinstall the adapter (video) driver.

Note

If problems repeatedly occur, contact an authorized service center.

Troubleshooting