Siemens dishwasher Інструкція з експлуатації Посібник з експлуатації - Сторінка 14

Друкувати сторінку

Siemens dishwasher Інструкція з експлуатації Посібник з експлуатації

1. Control Panel

Additional options

* depending on model

Additional options can be set with the

buttons @.

Express Wash *

The >>Express Wash<< function can

reduce the running time by approx. 20% to

50% depending on the selected rinse

programme. The change in the running

time is indicated on the digital display h.

To obtain optimum cleaning results at

a reduced running time, water and energy

consumption are increased.

Hygiene *

The temperature is increased during the

cleaning process. This increases the

hygiene status. This additional option is

ideal for cleaning e.g. chopping boards

and baby bottles.

Intensive zone *

Perfect for a mixed load. You can wash

very soiled pots and pans in the lower

basket together with normally soiled

utensils in the upper basket. The spray

pressure in the lower basket is intensified,

the rinsing temperature is increased

slightly.

Extra drying *

An increased temperature during the final

rinse and an extended drying phase

ensure that even plastic parts dry better.

There is a slight increase in the energy

consumption.

Washing the dishes

Programme data

The programme data (consumption

values) can be found in the summary of

instructions. They refer to normal

conditions and the water hardness set

value :

. Different influencing factors

such as e.g. water temperature or line

pressure may result in deviations.

Aqua sensor *

* depending on model

The Aqua sensor is an optical measuring

device (light barrier) which measures the

turbidity of the rinsing water.

The Aqua sensor is used according to the

programme. If the Aqua sensor is active,

"clean" rinsing water can be transferred to

the next rinse bath and water consumption

can be reduced by 2–4 litres. If the

turbidity is greater, the water is drained

and is replaced with fresh water. In the

automatic programmes the temperature

and running time can also be adjusted to

the degree of soiling.

Switching on the appliance

– Turn on the tap fully.

– Switch on ON/OFF switch (.

The display of the last selected

programme flashes. This programme

remains selected if no other

programme button 0 is pressed. The

expected programme duration flashes

on the digital display h.

– Press the START button H.

The programme starts running.

Remaining running time display

When the programme is selected, the

remaining running time of the programme

is indicated on the digital display h.

The running time is determined during the

programme by the water temperature, the

number of utensils as well as the degree

of soiling and may vary (depending on the

selected programme).