Digital Intelligence FireChief Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Корпус Digital Intelligence FireChief. Digital Intelligence FireChief 13 сторінок. Enclosure

Друкувати сторінку

1. What Is the Firechief

Swapping Drives

"Stop", "Unload", or "Dismount" the FireWire device using the

applicable operating system icon, process, or utility. This will notify

the operating system to complete any pending transfer operations so that

the device can be properly disconnected.

Disconnect FireChief:

computer.

Power off the FireChief

Remove existing drive: Once the FireChief has been powered off the

drive tray maybe unlocked and removed from the unit. Disconnect both the

4 pin power connector and 40 pin data cable from the hard drive.

Attach new drive: Install the new hard drive in the drive tray making sure

both data and power connectors are connected. Place drive tray back into

drive bay again lock into place.

Reconnect FireChief to host computer:

reconnect the FireWire cable to the host computer's FireWire controller.

Power on the FireChief

Disconnecting the FireChief

"Stop", "Unload", or "Dismount" the FireWire device using the

applicable operating system icon, process, or utility. This will notify

the operating system to complete any pending transfer operations so that

the device can be properly disconnected.

Disconnect FireChief:

computer.

Power off the FireChief

Drive trays may now be removed from the unit.

Modifying your FireChief's Read/Write Capabilities

The FireChief is shipped by default with one Read Only (write blocking) drive

bay and one Read/Writeable Drive bay.

enable Read-Only or Read-Write operation for both drive bays if desired. There

are a series of DIP switches on each of the FireWire bridges that control this

functionality.

Disconnect the FireWire cable from the host

However, it can be configured to

Power on FireChief and