Cisco Aironet 521 Посібник - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник для IP-телефон Cisco Aironet 521. Cisco Aironet 521 24 сторінки. Ip phones with multiplatform firmware
Також для Cisco Aironet 521: Посібник (35 сторінок), Посібник користувача (46 сторінок), Посібник із швидкого старту (26 сторінок), Посібник (40 сторінок), Посібник з адміністрування (48 сторінок), Посібник з монтажу (39 сторінок)

Connect a Standard Headset

You can use a standard headset with your desk phone. Standard headsets plug into the headset jack on the

back of the phone with an RJ-type connecter.

Figure 10: Standard Headset Connection

Caution

Failure to press the cable into the channel in the phone can damage the printed circuit board inside the phone.

The cable channel reduces the strain on the connector and the printed circuit board.

Procedure

Plug the headset into the headset jack on the back of the phone. Press the cable into the cable channel.

Connect a Cisco Standard Base with the Y-Cable

You can connect the standard base to your phone with the included Y-cable. But note that the Y-cable has

two RJ-type connectors - one for the auxiliary or AUX port, and one for the headset port. You can distinguish

between the two connectors by their size, as the AUX port connector is slightly larger than the headset port

connector.

Caution

Failure to press the cable into the channel in the phone can damage the printed circuit board inside the phone.

The cable channel reduces the strain on the connector and the printed circuit board.

Procedure

Step 1

Plug the smaller connector into the headset jack that is located on the back of the phone. Press the cable into

the cable channel.

Accessories