Cisco SPA232D Посібник із швидкого старту - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для IP-телефон Cisco SPA232D. Cisco SPA232D 17 сторінок. Ip dect handset
Також для Cisco SPA232D: Посібник користувача (10 сторінок)
Note: The Cisco SPA232D assigns DECT Line1 as the default line
for outgoing calls from Cisco SPA302D handsets. If needed, you
can configure additional VoIP accounts as separate "DECT Lines."
To do so, choose the Voice menu, and then use the DECT Line
1~10 links in the navigation tree. Use the check boxes on the Quick
Setup page to associate the DECT Line(s) to each handset.
Click Submit to save your settings.
S
7
TEP
If you wish to change the PIN for handset registration, open the
S
8
TEP
Voice > System page, and then enter up to four digits in the IVR
Admin Password field. Click Submit to save your settings.
For more information, see the online Help or the administration guide.
(Documentation links are provided in
Registering a Cisco SPA302D Handset
5
You can register Cisco SPA302D handsets to the integrated DECT base
station. These handsets can be purchased separately.
On the Cisco SPA302D handset, press the center Select button on
S
1
TEP
the 4-way navigation keypad.
Select Register.
S
2
TEP
Using the navigation arrows, scroll to the Settings icon
S
3
TEP
and press the center navigation button to select it.
Select Handset Registration.
S
4
TEP
On the Cisco SPA232D, press the Page/Registration button and
S
5
TEP
hold it down for at least seven seconds until the green status light
flashes quickly.
TIP: If you press the button for fewer than seven seconds, the
green status light flashes slowly, indicating the unit is in "paging"
mode and is not in registration mode. Registration will not work if
the unit is in paging mode.
The default PIN is blank, so do not enter a PIN. Press the left
S
6
TEP
softkey to confirm that you want to register the handset. The
"registering" message appears.
Cisco SPA232D Quick Start Guide
Where to Go From Here, page
14.)
7