Ricoh PJ WX4152 Прочитайте цей перший посібник - Сторінка 9

Переглянути онлайн або завантажити pdf Прочитайте цей перший посібник для Принтер Ricoh PJ WX4152. Ricoh PJ WX4152 20 сторінок.

• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.

Pulling the cord can damage the power cord. Use of damaged power cords could result in fire

or electric shock.

• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around

the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.

• When performing maintenance on the machine, always disconnect the power cord from the

wall outlet.

• Do not place the power cord and connection cable in a way that might cause someone to trip

and fall. The machine might fall over and cause an injury.

• Power Source

220–240 V, 1.7A or more, 50/60Hz

120 V, 3.7A or more, 60Hz

Please be sure to connect the power cord to a power source as above.

For users in Norway, this product is also designed for an IT power distribution system with phase-to-

phase voltage of 230V.

Handling the main machine

This section explains safety precautions about handling the main machine.

• Be sure to locate the machine as close as possible to a wall outlet. This will allow easy

disconnection of the power cord in the event of an emergency.

• If the machine emits smoke or odours, or if it behaves unusually, you must turn off its power

immediately. After turning off the power, be sure to disconnect the power cord plug from the

wall outlet. Then contact your service representative and report the problem. Do not use the

machine. Doing so could result in fire or electric shock.

• If metal objects, or water or other fluids fall inside this machine, you must turn off its power

immediately. After turning off the power, be sure to disconnect the power cord plug from the

wall outlet. Then contact your service representative and report the problem. Do not use the

machine. Doing so could result in fire or electric shock.

• Do not touch this machine if a lightning strike occurs in the immediate vicinity. Doing so could

result in electric shock.

Safety Information