Ricoh Pro L5130 Швидкий старт Quide - Сторінка 6

Переглянути онлайн або завантажити pdf Швидкий старт Quide для Принтер Ricoh Pro L5130. Ricoh Pro L5130 32 сторінки. Additional function 2
Також для Ricoh Pro L5130: Посібник з налаштування копіювання (44 сторінок), Посібник з техніки безпеки (32 сторінок), Посібник (12 сторінок)

CIP Training L5160/L5130

Additional Functions

In [Media Width], enter the media width a range of 297 to 1,626mm (approx. 11.7 to

64.0inches)(for RICOH Pro L5160) or 297 to 1,372mm(approx. 11.7 to 54.0inches)(for RICOH

Pro L5130).

Additional Drive Mode of Roll-Up Holder

Changing Roll-Up Drive Mode

[Overview]

This section explains the procedures for changing roll-up mode.

The machine can offer two roll-up modes for handling wide variety of media from thin films

to thick banners.

Basically, we recommend using "Inactive" drive mode, the default setting, unless there's

problem on print quality and/or media feeding.

However, if the media has not been fed and does not come out from the media output

location (Cure Heater) and/or the media rises on the platen (see following figure), media

feeding behavior may be improved by selecting "Forced Wind" drive mode.

Please use roll-up holder and select appropriate drive mode for improving media misfeed

issues.

Fig. Photo and schematic illustration of risen media on the platen.