Ricoh Ri 3000 Інформація з техніки безпеки та короткий посібник з монтажу - Сторінка 9
Переглянути онлайн або завантажити pdf Інформація з техніки безпеки та короткий посібник з монтажу для Принтер Ricoh Ri 3000. Ricoh Ri 3000 24 сторінки. Direct to garment printers
Друкувати сторінку
•
Unplug the machine before you move it. While moving the machine, take care that the power cord does not
get caught under the machine. Failing to take these precautions could result in fire or electric shock.
•
Before installing or removing options, always turn off the power at the back of the machine and allow time
for the main unit to fully cool down. Failing to take these precautions could result in burns.
•
When opening and closing the top cover, be sure to hold the handle. Be careful so that your hand or any
other part of your body is not caught with the top cover.
•
Before opening the top cover, please turn off the power switch on the back of the machine and open it.
Opening the cover without turning off the power may cause the machine to operate and cause injury.
•
After opening the top cover, use the prop to keep the cover raised so that it does not close unexpectedly.
Otherwise, your hand caught may be caught between the cover and the machine.
•
Make sure that the top cover is closed, then turn on the power switch on the back of the machine. Before
closing the cover, turning on the power may cause the machine to operate and cause injury.
•
Before turning on the power for the first time, remove the 2 retainer brackets that have labels affixed. Turning
on the power without removing them may cause the machine to malfunction.
Handling the machine's interior
•
Do not remove any covers or screws other than those explicitly mentioned in USER MANUAL.
•
Before you remove the cover, turn off the power switch on rear of the machine. Removing the cover with the
power on or removing parts other than those explicitly referred to could result in electric shock.
•
Do not attempt to disassemble or modify this machine. Doing so risks burns and electric shock.
Handle
Retainer brackets
7