Ricoh Savin CLP135 Посібник з підтримки продукту - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник з підтримки продукту для Принтер Ricoh Savin CLP135. Ricoh Savin CLP135 25 сторінок. Product guide

G130/G131 Product Support Guide

Printing Envelopes (Cont.)

Paper thickness 72 - 90 g/m2 (19 - 24 lb.)

Recommended weight and size

• Inch version

24 lb, Com 10

Note: Make sure paper is not stacked higher than the paper guides inside the bypass tray.

Printing on both-sides is not possible

Do not place envelopes of differing sizes at the same time.

You can place envelopes in short-edge feeding orientation, but this might result in creasing

Printer Driver Settings

In the [Paper source tray] list, click [Bypass tray], and then in the [Paper type] list, click [Thick].

To set the print size, in the [Original size] list, click [Com10 Env.] or [Monarch Env.], and then in

the [Printout paper size] list, click [Same as original size].

Limitations

· Surface bumps may occur around stuck-down and overlapping areas.

· Print positioning is easier with Com10 type envelopes than with the Monarch type.

· If envelopes are bent or creased and do not feed in smoothly, paper jams may occur.

· No more than 10 envelopes should be placed on the bypass tray at a time.

· Envelopes should be printed under the normal temperature and humidity.

Version – 1.0