Ricoh SP 310SFN Посібник з монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з монтажу для Принтер Ricoh SP 310SFN. Ricoh SP 310SFN 2 сторінки. Network settings guide
Click [IP Address].
The network settings are
complete.
The following screen appears:
The next step is to install the printer
driver from the provided CD-ROM.
For details, see User Guide on the
provided CD-ROM.
SP 310
SFN
Confi gure network settings using the control
panel.
Enter the MAC address printed in
the lower right part of the test page.
A.
IPv4 address automatic confi guration
(DHCP enabled)
•
A router with DHCP functionality or a DHCP
server is required.
Connect the printer to the
Enter the IP address that your
router or the hub using the
administrator has assigned to
Ethernet cable.
the printer.
Turn on the printer.
•
Press the [User Tools] key.
IPv4 IP addresses consist of four sections with
three digits each. If you want to enter a single
digit such as "7", enter 3 digits such as "007".
•
Enter a unique IP address that does not
confl ict with the IP addresses of any other
devices on the network.
•
Once the MAC address and IP address are
determined, the subnet mask and default
gateway are automatically entered.
Click [OK].
After confi rming that the
confi guration is complete,
restart the printer.
Press the [▼] or [▲] key to
select [Network Settings], and
Click [Connect Printer].
then press the [OK] key.
Click [Search Network Printer].
A list of printers currently connected to
the network appears.
Select your printer, and then
click [OK].
Press the [▼] or [▲] key to
If the printer information appears
select [IPv4 Confi guration], and
after a while, the connection was
then press the [OK] key.
established successfully.
Press the [▼] or [▲] key to
select [DHCP], and then press
the [OK] key.
If nothing appears on the screen, repeat
this procedure.
Press the [▼] or [▲] key to
select [Active], and then press
the [OK] key.
Press the [User Tools] key to
return to the initial screen.
If you are requested to restart the
machine, turn off the machine,
and then turn it back on.
/310
/311
/311
SFNw
SFN
SFNw
The network settings are
complete.
The next step is to install the printer
driver from the provided CD-ROM.
For details, see User Guide on the
provided CD-ROM.
B.
IPv4 address manual confi guration
(DHCP disabled)
Connect the printer to the
router or the hub using the
Ethernet cable.
Turn on the printer.
Press the [User Tools] key.
cvw104
Press the [▼] or [▲] key to
select [Network Settings], and
then press the [OK] key.
Press the [▼] or [▲] key to
select [IPv4 Confi guration], and
then press the [OK] key.
Press the [▼] or [▲] key to
select [DHCP], and then press
the [OK] key.
Press the [▼] or [▲] key to
select [Inactive], and then press
the [OK] key.
Press the [▼] or [▲] key to
select [IP Address], and then
press the [OK] key.
Enter the machine's IPv4
address using the number keys,
and then press the [OK] key.
Press the [◄] or [►] key to move
between fi elds.
Set up the computer so that the printer can be
used for all computers on the network.
Perform the following procedure using a
computer on the network:
Press the [▼] or [▲] key to
select [Subnet Mask], and then
•
press the [OK] key.
•
Enter the subnet mask using the
number keys, and then press the
[OK] key.
Press the [◄] or [►] key to move
cvw104
between fi elds.
•
Press the [▼] or [▲] key to
select [Gateway Address], and
•
then press the [OK] key.
The current gateway address is shown.
Enter the gateway address using
the number keys, and then press
the [OK] key.
Press the [◄] or [►] key to move
between fi elds.
Press the [User Tools] key to
On the [Advanced] tab, click the
return to the initial screen.
[Printing Defaults...] button.
Specify the default values for
If you are requested to restart
the printer driver that will be
the machine, turn off the
distributed to client computers,
machine, and then turn it back
and then click [OK].
on.
Click [Apply].
The network settings are
Click [OK].
complete.
The next step is to install the printer
driver from the provided CD-ROM.
For details, see User Guide on the
When the connection is not
provided CD-ROM.
successful
When the connection cannot be established
Sharing the printer on the
successfully, check the following:
network
❖
All settings
•
Is the printer turned on? Is the Ethernet cable
connected properly?
•
Has the network environment changed? (For
example, have you changed the printer's
location?)
If the network environment has been
To change printer properties, you need access
changed, you need to confi gure the network
privileges for Printer Management. Log on
settings again.
using an account in the Administrator group.
(SP 310DN/310DNw/311DN/311DNw only)
The following procedure is based on Windows
Use the following procedure to reset the
7. If you are using another operating system,
settings:
the procedure might differ slightly.
1.
Turn on the machine while holding down
On the [Start] menu, click
the [Job Reset] key and the [Stop/Start]
[Devices and Printers].
key.
•
When the Alert indicator starts fl ashing,
Right-click the icon of the
release the keys.
•
printer you want to use, and
All settings are reset to their factory
then click [Printer properties].
settings.
2.
Connect the machine to the network either
The printer properties window appears.
automatically or manually according to
your network environment.
On the [Sharing] tab, click
[Share this printer].
❖
IPv4 automatic setting
•
Does your network device have DHCP
functionality? Is the DHCP function enabled?
To share this printer with users using a
The DHCP functionality is required for
different version of Windows, continue with
automatic confi guration.
this procedure.
If you are not sure whether the network has
If you installed an alternative driver by
DHCP functionality, connect to the network
selecting [Share this printer] during the printer
manually.
driver installation, proceed to Step 8.
Click [Additional Drivers...].
❖
IPv4 manual setting
•
Select the version of Windows
Does another IP address confl ict with the
with which you want to share
printer's IP address?
the printer, and then click [OK].
If you have specifi ed the same IP address
as any of other computers' IP addresses, the
connection will fail.
Click [Browse...], select the
driver fi le, and then click
Specify another IP address and try again.
[Open].
Click [OK].
Network Settings Guide
© 2013
EN GB
EN US
EN AU
M156-8615A