Ricoh SP 311DNW Посібник для початківців - Сторінка 37
Переглянути онлайн або завантажити pdf Посібник для початківців для Принтер Ricoh SP 311DNW. Ricoh SP 311DNW 45 сторінок. Network settings guide
Також для Ricoh SP 311DNW: Посібник зі швидкого встановлення (2 сторінок), Технічні характеристики (4 сторінок), Посібник з монтажу (2 сторінок)
Друкувати сторінку
Connection Succeeded: If the Power indicator lights, the connection between the printer
•
and router was successful.
Connection Failed: If all indicators flash simultaneously, and after 30
•
seconds only the Power indicator lights, the connection failed. Check
that the router is properly configured and try again.
Important:
If you are configuring the printer again, e.g., you have changed the device's location, use the
•
following method to reset the printer to factory defaults, and then repeat steps 1-2.
Factory Defaults: Hold down [Job Reset] and [Stop/Start] keys, and then turn machine On. When
Alert indicator (middle LED) starts flashing, release keys. Turn printer power switch Off, and then On.
5. Next, install Printer Driver and Utility. See
Manual Method
If your router doesn't support WPS, for instance older routers, there are two ways to manually configure
wireless LAN settings, using the bundled Smart Organizing Monitor utility or the embedded
Monitor
utility.
Using Smart Organizing Monitor
Smart Organizing Monitor enables you to view and change printer settings, check supply levels, etc. from
your computer, as well as print
Before proceeding, please check the following:
Wireless router is working correctly, e.g., you can wirelessly connect to the Internet from your laptop.
•
Printer power switch is On.
•
Printer is connected to network (via Ethernet cable).
•
Printer's
IP address
is available.
•
Smart Organizing Monitor utility is installed. See
•
To configure wireless settings manually, using Smart Organizing Monitor, proceed as follows:
1. Click [Start]
[Smart Organizing Monitor Status].
RICOH SP 311DNw B&W Network Laser Printer
3.2 Network Quick
configuration
and
test
pages.
3.2 Network Quick
Getting Started Guide
Install.
Install.
Web Image
37