Ricoh SP 311SFNw Посібник для початківців - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник для початківців для Принтер Ricoh SP 311SFNw. Ricoh SP 311SFNw 47 сторінок. Network settings guide
Також для Ricoh SP 311SFNw: Посібник зі швидкого встановлення (2 сторінок), Технічні характеристики (4 сторінок), Технічні характеристики (4 сторінок), Посібник з монтажу (2 сторінок)

Enable Wi-Fi Setting

Before continuing, ensure that the printer's Wi-Fi function is enabled, as follows:

1. If a network (Ethernet) cable is connected to the printer, disconnect.

Important:

The printer cannot connect to a network cable (wired) and wireless LAN simultaneously.

•

2. Press [User Tools].

3. Scroll down [] to [Network Settings], and press [OK].

4. Select [Wi-Fi], and press [OK].

5. Select [Wi-Fi Enable], and press [OK].

6. If necessary, select [Enable], and press [OK].

7. To exit, press [Clear/Stop].

Display reads, Please Restart Machine.

8. Turn printer power switch Off. Wait a moment, and then turn On.

Again, this method is recommended when your router has a WPS button. When

using this method, optimum security for the devices is automatically configured,

based on the connection environment. As such, it cannot be assumed that the

configured security setting is the most secure.

To connect using the PBC Method, proceed as follows:

1. Press [User Tools].

2. Scroll down [] to [Network Settings], and press [OK].

3. Select [Wi-Fi], and press [OK].

4. Select [WPS], and press [OK].

5. Select [PBC], and press [OK].

Display reads, "WPS PBC Connect?"

6. Press [Yes].

Display reads, Please push the [AP] within 2 minutes (WPS button on the router). Display then

reads, PBC Executing....

7. When display reads, Connection to AP has Succeeded, press [Exit]  [User Tools].

Note:

If the connection fails, Connection to AP has Failed appears on the display, press [Exit]. Repeat

•

from step 1, and make sure to firmly press the WPS button on the router after step 6. If the

problem persists, contact 1-800-RICOH38 (742-6438), option #1.

8. Turn printer power switch Off. Wait a moment, and then turn On.

RICOH SP 311SFNw B&W Multifunction Laser Printer

PIN Method

Getting Started Guide

Manual Method