Ricoh SP3 Технічний бюлетень - Сторінка 20

Переглянути онлайн або завантажити pdf Технічний бюлетень для Принтер Ricoh SP3. Ricoh SP3 28 сторінок.

Друкувати сторінку
RTB Correction
Reissue date: 30-Apr-98
The items in bold italics have been corrected or added.
An illustration has been added.
Model:
SP3
Subject:
Duplex Jam
From:
QAC Field Information Dept.
Troubleshooting
Classification:
Mechanical
Paper path
Other (
SYMPTOM
1. During paper feed from the duplex unit, the leading edge of the paper is bent or a no-
feed jam occurs.
2. During stacking in the duplex unit, a stacking jam occurs.
ACTION
1. Paper feed jam (leading edge bent or non-feed)
1) Check to see if the duplex guide mylar is set properly. If it is bent or out of position,
please replace the duplex guide mylar (A1344670) or the duplex guide plate
(A1344662) .
Method: Rotate the feed roller by hand. If it makes a clicking sound it is OK.
(If the mylar is bent or out of position, the leading edge of the copy may be bent or
no-feed jams may occur.)
Reattaching the mylar (as shown below) is a temporary countermeasure. As a
permanent countermeasure, the duplex guide plate should be replaced.
T
B
echnical
Part information
Electrical
Transmit/receive
)
ulletin
Date:
15-Apr-98
Prepared by:
A.Sasaki
Action required
Service manual revision
Retrofit information
PAGE: 1/4
No:
14
0.7mm
1m