Cisco 3600 Series Примітка до конфігурації - Сторінка 4

Переглянути онлайн або завантажити pdf Примітка до конфігурації для Мережевий маршрутизатор Cisco 3600 Series. Cisco 3600 Series 23 сторінки. Memory upgrade
Також для Cisco 3600 Series: Огляд продукту (10 сторінок), Інструкції з оновлення (30 сторінок), Посібник користувача (17 сторінок), Примітка до заявки (41 сторінок), Посібник з конфігурації (36 сторінок), Посібник користувача (25 сторінок), Додаток (15 сторінок), Посібник користувача (7 сторінок), Посібник (5 сторінок), Примітка до конфігурації (18 сторінок), Примітка до конфігурації (25 сторінок)

Overview of Cisco 3600 Series Power Supplies

•

Preventing Electrostatic Discharge Damage

Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. It occurs when

electronic printed circuit cards are improperly handled and can result in complete or intermittent

failures. Always follow ESD prevention procedures when removing and replacing cards. Ensure that

the router chassis is electrically connected to earth ground. Wear an ESD-preventive wrist strap,

ensuring that it makes good skin contact. Connect the clip to an unpainted surface of the chassis

frame to safely channel unwanted ESD voltages to ground. To properly guard against ESD damage

and shocks, the wrist strap and cord must operate effectively. If no wrist strap is available, ground

yourself by touching the metal part of the chassis.

Caution

between 1 and 10 megohms (Mohm).

Overview of Cisco 3600 Series Power Supplies

Figure 1 shows the AC power supply for the Cisco 3620 router. Figure 2 shows the AC power supply

for the Cisco 3640 router. The DC power supplies look similar, but have a terminal block cover in

place of the three-pronged connector for an AC power cord.

Figure 3 shows the location of the power supply in a Cisco 3620 series router. Figure 4 shows the

location of the power supply in a Cisco 3640 series router. In both cases an AC power supply is

shown as an example.

Table 1 lists AC power supply speciﬁcations, and Table 2 lists DC power supply speciﬁcations.

These tables apply to both routers.

4 Cisco 3600 Series Power Supply Conﬁguration Note

Look carefully for possible hazards in your work area, such as moist ﬂoors, ungrounded power

extension cables, and missing safety grounds.

Never assume that power is disconnected from a circuit. Always check.

If an electrical accident occurs, proceed as follows:

— Use caution, and do not become a victim yourself.

— Turn off power to the system.

— If possible, send another person to get medical aid. Otherwise, determine the condition of the

victim and then call for help.

— Determine if the person needs rescue breathing or external cardiac compressions; then take

appropriate action.

For safety, periodically check the resistance value of the antistatic strap, which should be