Cisco 400 Series Посібник із швидкого старту - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мережеве обладнання Cisco 400 Series. Cisco 400 Series 8 сторінок. Fasthub
10/100 series
Також для Cisco 400 Series: Посібник з конфігурації (40 сторінок)
Друкувати сторінку
Connect the Hub to Other Network Devices
Maximum cable length:
328 ft (100 m)
Note: Use a straight-through cable to
connect two ports when one of the ports is
designated with an X. Use a crossover cable
to connect two ports when both ports are
designated with an X.
Connect the Hub to Servers,
Routers, and Workstations
•
Connect a Category 3, 4, or 5
straight-through cable to any 10/100
port on the hub and to a 10BaseT port
on the workstation, server, or router.
•
Connect a Category 5 straight-through
cable to any 10/100 port on the hub and
to a 100BaseTX port on the
workstation, server, or router.
10BaseT/100B aseTx
1x
2x
3x
4x
5x
6x
7x
8x
9x
10x
11x
12x
13x
14x
10BaseT/100BaseTX
network port (RJ-45)
10BaseT or
100BaseTX port
(RJ-45)
Ethernet cable
(not supplied)
15x
16x
17x
18x
19x
20x
21x
22x
23x
24x
24
Connect the Hub to Switches
and Other Hubs
•
Connect a Category 3, 4, or 5 crossover
cable to any 10/100 port on the hub and
to a 10BaseT port on the target switch
or hub.
•
Connect a Category 5 crossover cable to
any 10/100 port on the hub and to a
100BaseTX port on the target switch or
hub.
2