Sony A55 Посібник із швидкого старту

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Цифрова камера Sony A55. Sony A55 6 сторінок.

ExpoDisc Custom White Balance Procedures

Sony Cameras

Sony A7 R IV

1. Install the ExpoDisc and set the camera to Manual Focus mode.

2. Allow the camera to set an automatic exposure using the "P", "S" or "A"

modes or set the correct manual exposure in "M" mode.

3. From the MENU navigate to the Camera Settings1 screen and select White

Balance and then select Custom 1 - Custom 3, and then press the right side

of the control wheel.

4. Select Set and then press the center of the control wheel.

5. Aim the camera in the appropriate direction for the given lighting condition

and press the center of the control wheel. See the ExpoDisc Instruction

Manual for more information on where to aim the camera.

6. After the shutter sound beeps, the calibrated values (ColorTemperature and

Color ﬁlter) are displayed.

7. Press the center of the control button again. The monitor returns to the menu

display with the memorized white balance retained. The custom white

balance setting registered in this operation is effective until a new setting is

registered.

8. If you get the message "Custom WB error" this indicates that you need to

adjust your exposure and reattempt to set your white balance.

9. From the White Balance menu, select Custom 1 (or whichever Custom setting

you selected in Step 3).

10. Remove the ExpoDisc, return the camera to auto focus if desired and start

shooting.

Sony A7 R III

1. Install the ExpoDisc and set the camera to Manual Focus mode.

2. Allow the camera to set an automatic exposure using the "P", "S" or "A"

modes or set the correct manual exposure in "M" mode.

3. From the MENU navigate to the Camera Settings1 screen and select White

Balance and then Custom Setup.

4. Aim the camera in the appropriate direction for the given lighting condition

and press the center of the control wheel. See the ExpoDisc Instruction

Manual for more information on where to aim the camera.

5. After the shutter sound beeps, the calibrated values (ColorTemperature and

Color ﬁlter) are displayed.

6. Press the center of the control button again. The monitor returns to the

recording information display with the memorized white balance retained.

The custom white balance setting registered in this operation is effective until

"Sony" and the Sony camera models listed are trademarks of Sony, Inc.