Sony Odyssey7Q+ Посібник з налаштування - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з налаштування для Цифрова камера Sony Odyssey7Q+. Sony Odyssey7Q+ 19 сторінок. 4k raw
Також для Sony Odyssey7Q+: Посібник з налаштування (8 сторінок)

Друкувати сторінку

4K/2K RAW RECORDING

FS700 CONFIGURATION

1. SET UP THE FS700 FOR RAW RECORDING

MENU » REC/OUT SET » REC SET » RAW SET

Select any of the following frames rates that you wish to record on Odyssey7Q:

4096x2096/24p

4096x2096/30p

NTSC

4096x2096/60p

2048x1080/24p

2048x1080/30p

2048x1080/60p

4096x2160/25p

4096x2160/50p

PAL

2048x1080/25p

2048x1080/50p

Once the selection is made you will need to press EXEC on the camera, to return to live

/ record.

2. SET GAMMA (REQUIRED FOR RAW RECORDING)

PICTURE PROFILE » PP7 » SETTING » GAMMA » S-Log2

PP7 is the default profile for S-Log2, Note that only S-Log2 is supported when recording

RAW.

Once the camera is set to the desired frame rate, then connect to the Odyssey7Q

3. SET THE S&Q BUTTON FOR RAW HIGH SPEED

MENU » OTHERS » RAW S&Q BUTTON SET » 4K/2K SUPER SLOW

NOTE: In 4K Super Slow the camera only outputs a maximum of 4K 60p, thus this mode

will use internal buffering, and then will need to playback the footage to an Odyssey7Q.

In 4 Super Slow, the Odyssey7Q Trigger must be set to Camera.

MENU » RECORD » TRIGGER » CAMERA

NOTE: For 2K up to 240fps sustained, or 4K up to 60p sustained, but 4K 100/120 3-4

second burst.

(BACK)

» REC Command » ON

CONTINUED »