Cisco Aironet 340 Series Посібник із швидкого старту - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мережеве обладнання Cisco Aironet 340 Series. Cisco Aironet 340 Series 12 сторінок. Usb client adapter
Також для Cisco Aironet 340 Series: Посібник із швидкого старту (12 сторінок), Посібник із швидкого старту (13 сторінок), Примітки до випуску (14 сторінок), Посібник із швидкого старту (16 сторінок), Посібник із швидкого старту (12 сторінок)
Друкувати сторінку
Compliance Information for the Cisco Aironet 340 Series Wireless Bridge
Federal Communication Commission Declaration of Conformity Statement
This device complies with Part 15 rules. Operation is subject to the following two conditions:
1
This device may not cause harmful interference, and
2
This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a residential
environment. This equipment generates, uses, and radiates radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference.
However, there is no guarantee that interference will not occur. If this equipment does cause
interference to radio or television reception, which can be determined by turning the equipment
on and off, the user is encouraged to correct the interference by one of the following measures:
•
Reorient or relocate the receiving antenna.
8
•
Increase separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician.
Warning
other devices operating at this frequency. Any changes of modification to said product
not expressly approved by Cisco could void the user's authority to operate this device.
Professional Installation
Per the recommendation of the FCC, the installation of high gain directional antennas to the
system, which are intended to operate solely as a point-to-point system and whose total power
exceeds the +36 dBm EIRP, require professional installation. It is the responsibility of the
installer and the end user that the high power systems are operated strictly as a point-to-point
system.
The Part 15 radio device operates on a non-interference basis with the