Cisco Prisma EtherLinX Інструкція з монтажу Посібник з монтажу - Сторінка 25
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Мережеве обладнання Cisco Prisma EtherLinX. Cisco Prisma EtherLinX 38 сторінок.
Друкувати сторінку
SNMP Management,
Creating Community Strings for SNMP
The purpose of community strings is to add a level of security to a network. The
default community string is named "public" and has read/write access. We
recommend deleting Public, then adding necessary custom communities strings such
as one with read-only access (for general use), the other with read/write access (for
the administrator).
Follow these steps to create a new community string.
1.
From the Main Configuration screen, press C.
2.
Enter the name of the new community (up to 16 characters, no spaces) and
press Enter.
3.
Type one of the following to assign the community string's access rights
R – read-only access
W – read/write access
Enter – abort
4.
Press Enter.
5.
Type reboot for changes to take effect.
Result: The Saved Values and Current Values should now both display the
changes made (e.g., new IP address and subnet mask).
Deleting Community Strings
Follow these steps to delete all community strings and start over.
1.
From the Main Configuration screen, press U.
Result: You will be asked, Are you sure you want to delete all future
strings?
2.
Press Y to proceed
OR
press N to abort.
3.
Press Enter.
Result: This function will delete ALL community strings. If you want to be
able to selectively delete community strings, use iConfig to configure your
device.
4008226 Rev B
Continued
Continued on next page
25