Cisco SCE 1000 and Посібник із швидкого старту - Сторінка 46
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мережеве обладнання Cisco SCE 1000 and. Cisco SCE 1000 and 49 сторінок. Service control engine 1000 2xgbe
Друкувати сторінку
• Troubleshooting the link interface subsystem:
show interface GigabitEthernet 0/# — Displays information for a specific GBE Interface.
–
Following is a sample output from the show interface command.
ip address: 10.1.6.145
subnet mask: 255.255.0.0
Configured duplex: auto
AutoNegotiation is On, link is Up, actual duplex: half
show interface GigabitEthernet 0/# counters — Displays the values of counters of a GBE interface.
–
Following is a sample output from the show interface counters command.
In total octets: 191520
In good unicast packets: 560
In good multicast packets: 0
In good broadcast packets: 0
In packets discarded: 0
In packets with CRC/Alignment error: 0
In undersized packets: 0
In oversized packets: 0
Out total octets: 0
Out unicast packets: 0
Out non unicast packets: 0
Out packets discarded: 0
Refer to The User Log for an explanation of commands related to the user log.
46