Cisco TelePresence MCU 4200 Series Початок роботи - Сторінка 11
Переглянути онлайн або завантажити pdf Початок роботи для Мережеве обладнання Cisco TelePresence MCU 4200 Series. Cisco TelePresence MCU 4200 Series 18 сторінок. Accessing conferences
Також для Cisco TelePresence MCU 4200 Series: Посібник для початківців (15 сторінок)
Друкувати сторінку
3
Click
Apply changes
Before you configure the MCU to use, and register conferences to, a SIP
i
registrar, you must set up the MCU and its conferences on that SIP
registrar.
Step three: Add endpoints (optional)
One way to add participants to a conference that you create is to have the MCU
automatically call them when the conference starts. To do this, you configure their
endpoints on the MCU. When you set up a conference, you can choose the
endpoints from the
each endpoint's details every time. Participants that are pre-configured for a
conference will automatically be called by the MCU to join that conference.
To define pre-configured endpoints:
1
In the web interface of the MCU, go to
To add a H.323 endpoint, click
To add a SIP endpoint, click
To add a VNC screen, click
2
Configure the endpoint settings you require, using the online help for further
assistance.
3
Click
Add endpoint
.
Pre-configured participants
Add VNC
.
list. This is easier than entering
:
Endpoints
Add H.323
Add SIP
Configuring the MCU
11