3Com OfficeConnect WX1200 Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мережевий маршрутизатор 3Com OfficeConnect WX1200. 3Com OfficeConnect WX1200 10 сторінок. Secure converged networks enterprise edition
Також для 3Com OfficeConnect WX1200: Посібник із швидкого старту (10 сторінок), Посібник із швидкого старту (2 сторінок), Технічний паспорт (6 сторінок), Посібник з експлуатації (15 сторінок)

OBILITY

YSTEM

OFTWARE

Click Start to begin. The wizard screens guide you

through the configuration steps. Each screen has

online help to guide you through the configuration.

After guiding you through the configuration, the

wizard displays a summary of the configuration values

you selected. Here is an example:

UICK

TART

UIDE

Review the configuration settings, then click Finish to

save the changes, or click Back to change settings. If

you want to quit for now and start over later, click

Cancel.

If you click Finish, the wizard saves the configuration

settings into the switch's configuration file. If the

switch is rebooted, the configuration settings are

restored when the reboot is finished.

The switch is ready for operation. You do not need to

restart the switch.

CAUTION: On a WXR100, do not press the Fn switch

for more than four seconds! On a WXR100 that is

fully booted, the Fn switch erases the configuration if

held for five seconds or more. If you do accidentally

erase the configuration, you can use the Web Quick

Start to reconfigure the switch.

Remotely Configuring a Switch Using 3WXM

(any model)

This installation option requires someone to

preconfigure the switch in a 3WXM network plan and

someone to physically install and power on the switch.

Preconfigure the Switch in 3WXM

If you know the switch's serial number, use the

following procedure to set up the switch's

configuration in 3WXM.

Start 3WXM Services.

Start a 3WXM client and connect to 3WXM Services.