Epson Continuous Ink Supply System Інструкція з монтажу Посібник з монтажу - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Аксесуари для принтерів Epson Continuous Ink Supply System. Epson Continuous Ink Supply System 8 сторінок. For epson stylus photo r200/r210/r300/r310
Друкувати сторінкуPlease pay attention to the ink level in the reservoirs; if the ink level is below 1CM as the
above picture shown, please use refill kits to fill ink into Reservoir bottles. Carefully pull out
the rubber plugs from the refill holes.(there is possibility of ink spattering. Be careful!) Refill
ink according to the color in short supply. Then put the rubber back
(Please keep the printer
.
and the reservoir at the same horizontal line during the process of refilling
ink.)
6. How to install the cover of cartridge:
Pls first install the left side of
Then install the other side
Adjust well the joint position
the cover into cartridge-car
Press the right side of cover
Finished
to make it install well
7、Attention for maintenance:
Take out the CISS including the inner cartridges and other components. Then
remove support arm from printer, and place the original cartridges in. Please
inquire local dealer before sending to maintenance.
Notice:
1. Please don't take out cartridge at random after installing the CIS system.