Motorola GP240 Посібник користувача - Сторінка 31
Переглянути онлайн або завантажити pdf Посібник користувача для Двостороннє радіо Motorola GP240. Motorola GP240 46 сторінок. Professional radio, power distribution and controller
Також для Motorola GP240: Посібник користувача (46 сторінок), Сервісна інформація (32 сторінок), Сервісна інформація (30 сторінок), Сервісна інформація (30 сторінок)
Друкувати сторінку
UG_240_280_EN.fm Page 27 Wednesday, August 14, 2002 10:30 AM
Making a Call Alert
(GP280 radios only)
There are three phases in making a call alert, namely
• initiating a call alert,
• entering the radio ID number that you wish to
page, and
• sending the call alert.
Initiating a Call Alert
1. Press / until PAGE is
displayed.
2. Press l (the softkey below PAGE).
3. The display shows the
last ID number transmit-
ted or received.
Note: The same list is shared by both Call Alert and
Private Conversation features.
• If your radio has been so programmed, you
can press the page button for quick access to
the Call Alert feature. This will take you directly
to step 3.
Downloaded from
www.Manualslib.com
PAGE PHON VIEW
ID: 722588
manuals search engine
Entering the Radio ID Number that you
wish to Page
If the last ID number called or received is the desired
number, go directly to step 5.
To enter a new number
4a. Enter the new six-digit ID number using the
keypad.
4b. On the display, the old ID number disappears
and the new digits appear as they are being
entered.
4c. The cursor flashes indicating the location of
the next number to be entered.
Note: Exactly six digits must be entered for the
radio ID number. If fewer than six digits were
entered, you will hear a bad-keypress tone when
attempting to send the radio ID number. A bad-
keypress tone will also be heard if you try to
enter a seventh digit.
• Once you have started entering numbers,
the , key functions as a backspace key.
Pressing it causes the last digit entered to be
erased, and the cursor moves to the left. When