Motorola TALKABOUT T92 Посібник - Сторінка 31

Переглянути онлайн або завантажити pdf Посібник для Двостороннє радіо Motorola TALKABOUT T92. Motorola TALKABOUT T92 35 сторінок. Portable two-way radios

Друкувати сторінку
Motorola TALKABOUT T92 Посібник
Note: There is a short delay between the time you start
talking and when the radio transmits.
Dual Channel Monitor
Enables you to scan the current channel and another channel
alternately.
To set another channel and start Dual Channel:
1. Press
Menu button five times until the Dual Channel
icon appears. The Dual Channel will flash.
2. Press
or
to select the channel then press
button.
3. Press
or
to select the Interference Eliminator Code.
4. Press the PTT button to exit menu or
continue set up.
5. The radio starts to Dual Channel.
Note: If you set the same channel and code as the current
channel, Dual Channel Monitor turns OFF.
Silent Mode (Vibrate Alert)
Silent Mode (Vibrate Alert) notifies you that your radio is
receiving a message. This is useful in noisy environments.
When the alert is on, the radio vibrates once every 30 seconds
when you receive a message on the channel and code you set.
1. Press
Menu button seven times until Vibracall
is displayed. The current setting will flash.
2. Press
or
to change the setting to On/Off.
3. Press the PTT button to exit menu or
continue set up.
Keypad Tones
You may enable or disable the speaker key tones. You will hear
the key tone each time a button is pushed.
1. Press
icon appears. The current setting On/Off will flash.
2. Press either
3. Press the PTT button to confirm or
Menu
continue set up.
Note: The following are not disabled when the key tone
•Transmit time-out alert tone
•Call tone
Menu button to
•Low battery alert tone or
•The transmitted talk confirmation tone
Transmitting a Talk Confirmation Tone
You can set your radio to transmit a unique tone when you finish
transmitting. It is like saying "Roger" or "Over" to let others know
you have finished talking.
1. Press
icon appears. The current setting On/Off flashes.
2. Press
icon
3. Press the PTT button to set or
set up.
Menu button to
Menu button eight times until Keypad Tone
or
to turn On/Off.
feature is OFF:
Menu button nine times until the Roger Tone
or
to turn On or Off.
Menu button to
Menu button to continue
7