Motorola COMFORT85-3 CONNECT Посібник користувача - Сторінка 17
Переглянути онлайн або завантажити pdf Посібник користувача для Радіоняня Motorola COMFORT85-3 CONNECT. Motorola COMFORT85-3 CONNECT 48 сторінок. 5" hd wi-fi video baby and home monitor
Також для Motorola COMFORT85-3 CONNECT: Посібник користувача (46 сторінок)
Друкувати сторінку
4.8 Set temperature format
The temperature reading from the temperature sensor at the
back of the Baby Unit will be displayed at the top of the Parent
Unit LCD screen. You can switch temperature format between
Centigrade and Fahrenheit as follows:
Press the M button and the menu bar will pop up.
1.
2. Press the < LEFT or > RIGHT button until
3. Press the + UP button or - DOWN button to select
4. Press M button to exit.
4.9 Add Camera (Registration)
The Baby Unit(Camera) is pre-registered to your Parent Unit.
You do not need to register it again unless the Baby Unit
(Camera) loses its link with the Parent Unit.
To add a new compatible camera to the Parent Unit, proceed
as follows:
1.
Press the M MENU button and the menu bar will pop up.
2. Press the < LEFT or > RIGHT button to select add camera
, the camera list
icon
3. Press the + UP or -DOWN button to select the desired
amera, and press the O button to start searching for a
camera unit, with "press PAIR on cam" shown.
Note: If a baby unit is currently paired with the Parent Unit,
its camera location (with a
for a new registration.
4. Press and hold the PAIR button on the rear of the camera
until the Parent Unit finds the camera, beeps and PAIR
OK appears on the screen. The video from the camera will
then appear.
NOTE
If a particular Baby Unit was registered previously, registering
this current Baby Unit again will cancel its old registration.
Parent Unit Menu Options
appear on the screen.
against it) cannot be selected
is highlighted.
o
o
C or
F.
17