Epson PowerLite 97 Посібник з експлуатації - Сторінка 32

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Програмне забезпечення Epson PowerLite 97. Epson PowerLite 97 47 сторінок. Warranty statement
Також для Epson PowerLite 97: Посібник з експлуатації (48 сторінок), Швидке налаштування (4 сторінок), Декларація про відповідність (4 сторінок), Посібник з монтажу (2 сторінок)

Related tasks

Installing EasyMP Network Updater

Error Messages When Setting Up an Update Schedule

Error Messages

The selected file is not projector firmware, or

the file may be corrupt.

Cannot find the projector to be updated. Import There are no projectors in the projector list that

a projector list or register a projector.

Cannot execute because another schedule is

running.

There is already a schedule at the specified

time. Change the time, and then try again.

For the update start time, enter a time later

than the current time.

There are already XX schedules has been

registered. Delete a schedule and then add the

new schedule.

Cannot delete because the selected schedule

is running.

Start the schedule.

Parent topic:

Error Message List

Remedy

Select the correct projector firmware file or

download the firmware again.

Contact your nearest Epson support center for

more information on acquiring your projector

firmware.

support the selected firmware. Import a projector

list or register a projector, and then try again.

When the other schedule is complete, try running

the schedule again or set another date and time.

You can only register one schedule at a specific

time. Change the date and/or time, and then

Make sure you do not set the date and time in the

past. Enter a time later than the current time.

You can register up to 50 schedules. Delete a

schedule and then add the new schedule.

Cancel the schedule first, and then delete it.

If the time you set arrives while you are still setting

the schedule, the schedule starts. If you need to

set the schedule again, cancel the schedule first,

and then make the settings again.