Pioneer DEH-7350BT Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Автомобільний приймач Pioneer DEH-7350BT. Pioneer DEH-7350BT 21 сторінка. Cd rds receiver

Друкувати сторінку

Section

Operating this unit

CLOCK SET (setting the clock)

1 Press M.C. to display the setting mode.

2 Press M.C. to select the segment of the clock

display you wish to set.

Hour—Minute

3 Turn M.C. to adjust the clock.

FM STEP (FM tuning step)

The FM tuning step employed by seek tuning can

be switched between 100 kHz, the preset step, and

50 kHz.

! If seek tuning is performed in 50 kHz steps,

stations may be tuned in imprecisely. Tune in

the stations with manual tuning or use seek

tuning again.

! The tuning step remains at 50 kHz during man-

ual tuning.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the FM tuning step.

50 KHZ (50 kHz)—100 KHZ (100 kHz)

3 Press M.C. to confirm the selection.

AM STEP (AM tuning step)

The AM tuning step can be switched between 9

kHz, the preset step, and 10 kHz. When using the

tuner in North, Central or South America, reset

the tuning step from 9 kHz (531 kHz to 1 602 kHz

allowable) to 10 kHz (530 kHz to 1 640 kHz allow-

able).

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the AM tuning step.

9 KHZ (9 kHz)—10 KHZ (10 kHz)

3 Press M.C. to confirm the selection.

AUX (auxiliary input)

Activate this setting when using an auxiliary de-

vice connected to this unit.

1 Press M.C. to turn AUX on or off.

USB (plug and play)

This setting allows you to switch your source to

USB/iPod automatically.

1 Press M.C. to turn the plug and play function

on or off.

ON – When a USB storage device/iPod is con-

nected, depending on the type of device, the

source is automatically switched to USB/iPod

when you turn on the engine. If you disconnect

your USB storage device/iPod, this unit's

source is turned off.

OFF – When a USB storage device/iPod is con-

nected, the source is not switched to USB/

iPod automatically. Please change the source

to USB/iPod manually.

SW CONTROL (rear output and subwoofer set-

ting)

The rear speaker leads output and RCA output

can be used for full-range speaker or subwoofer

connection.

If you switch to REAR-SP :SW, you can connect a

rear speaker lead directly to a subwoofer without

using an auxiliary amp.

Initially, REAR-SP is set for rear full-range speaker

connection (FUL).

1 Press M.C. to display the setting mode.

2 Turn M.C. to change the output and press to

select.

REAR-SP—PREOUT

3 Turn M.C. to change the setting.

REAR-SP: FUL—SW

PREOUT: SW—REA

! Even if you change this setting, there will

be no output unless you turn the sub-

woofer output on (refer to SUBWOOFER1

(subwoofer on/off setting) on the previous

page).

! If you change this setting, subwoofer out-

put in the audio menu will return to the fac-

tory settings.

DEMO (demo display setting)

1 Press M.C. to turn the demo display on or off.

Operating this unit

SCROLL (scroll mode setting)

S/W UPDATE (updating the software)

When ever scroll is set to ON, recorded text infor-

This function is used to update this unit with the

mation scrolls continuously in the display. Set to

latest software. For information on the software

OFF if you prefer the information to scroll just

and updating, refer to our website.

! Never turn the unit off while the software is

once.

1 Press M.C. to turn the ever scroll on or off.

1 Press M.C. to display the data transfer mode.

BT CLEAR (resetting the Bluetooth wireless tech-

nology module)

Bluetooth telephone data can be deleted. To pro-

tect personal information, we recommend deleting

this data before transferring the unit to other per-

Using an AUX source

sons. The following settings will be deleted.

! phone book entries on the Bluetooth tele-

input jack.

phone

! preset numbers on the Bluetooth telephone

! registration assignment of the Bluetooth tele-

source.

phone

! call history of the Bluetooth telephone

Note

! information of the connected Bluetooth tele-

AUX cannot be selected unless the auxiliary set-

phone

ting is turned on. For more details, refer to AUX

1 Press M.C. to show the confirmation display.

(auxiliary input) on this page.

YES is displayed. Clearing memory is now on

standby.

If you do not want to reset phone memory,

press

. The display reverts.

2 Press M.C. to clear the memory.

CLEARED is displayed and the settings are de-

leted.

! While this function is in use, do not turn

off the engine.

VER INFO (Bluetooth version display)

You can display the system versions of this unit

and of Bluetooth module.

1 Press M.C. to display the information.

being updated.

Follow the on-screen instructions to finish up-

dating the software.

Insert the stereo mini plug into the AUX

Press S (SRC/OFF) to select AUX as the

<YRD5325-A/N>10