Pioneer PD-S701 Інструкція з експлуатації Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Програвач компакт-дисків Pioneer PD-S701. Pioneer PD-S701 22 сторінки. Compact disc player
Також для Pioneer PD-S701: Інструкція з експлуатації Посібник з експлуатації (32 сторінок)
Друкувати сторінку
CONNECTIONS
Output cabie
$761
aa
PD-S
Rod
TAO
R
Power cord
CD-DECK SYNCHRO cord
Ls
Optical fiber cable
Control cord
DIGITAL
INEUT
XQ
(Contre
Our
©
=a
OPTICAL
0000
cD
re)
L
Stereo amplifier
Cassette deck
r=
CD-DECK
SYNCHRO.
@
Make
sure that all of the components
are turned off before
making connections.
CONNECTING THE OUTPUT CABLE:
[PD-S$801}
Connect the LINE OUT jacks of this unit to the input jacks (CD or
AUX) of the amplifier. Make sure that the white plugs are connected
to the left (L) jacks and the red plugs to the right (R} jacks.
@
Be sure not to connect this unit to the amplifier's PHONO jacks,
as sound will be distorted and normal playback will not be possible.
[PD-S701]
The unit is equipped with two sets of output connectors in order to
provide VARIABLE and FIXED output levels. Connect the appropriate
set of connectors to your amplifier's INPUT connectors.
The two
sets of connectors
can
also be used
to connect
the player
simultaneously to two stereo amplifiers.
@ When the VARIABLE jacks are used: The sound outputlevel can
be adjusted using the PHONES/LINE
LEVEL control or the
QUTPUT LEVEL buttons on the remote control unit.
@
When the FIXED jacks are used: The sound output level remains
fixed; the PHONES/LINE LEVEL control and the OUTPUT LEVEL
buttons on the remote control unit have no effect.
CONNECTING THE OPTICAL FIBER CABLE
This unit can be connected to an amplifier equipped with an optical
digita! jack.
1. Remove
the protective
dust cap from this unit's OPTICAL
DIGITAL OUT jack.
2, Use an optical fiber cable to connect the OPTICAL DIGITAL OUT
jack of this unit to the optical digital input jack of the amplifier.
e@ Align the plug of the optical fiber cable with the optical digital jack
and fully insert the plug to make a secure connection.
Use a separately sold optical fiber cable for the optical digital jack
connections. However, when making optical digital connections, this
player can only be connected to an amplifier which uses the same
type of optical transmission/reception module.
Precautions concerning use of optical fiber cables
@
Fully insert the optical fiber cable plugs all the way into the jacks.
@
Be careful not to fold or crimp the cable. When coiling an optical
fiber cable for storage, make sure the diameter of the coilis 15cm
{6 in) or larger.
e
Use an optical fiber cable with a length of 3 m (9 ft) or less.
Protect the optical fiber cable plugs from scratches and dust.
@
When the unitis not connected using an optical
fiber cable, be sure
to keep the protective dust cap plugged into the optical digital
output jack at ail times.
CD-Deck synchro function
If you have a Pioneer cassette deck provided with the CD-Deck
synchro function, connect the CDeDECK
SYNCHRO jacks of the
CD player and cassette deck. With this function, synchro recording
can be carried out between player and deck.
@
For details on connections and operation, refer to the Operating
Instructions supplied with the cassette deck.
e@ The CD-DECK SYNCHRO cord is not supplied with the CD player.
NOTE:
In order to enable the CD-DECK SYNCHRO recording function, the
normal output cable must be connected to the stereo amplifier.
System remote control with a Pioneer stereo
amplifier that has the i mark
{PD-S701: Australian model only, PD-S801: Multi-voltage model only)
When a Pioneer stereo amplifier bearing the fi] mark is used, connect
the CONTROL IN jack on the rear panel of the CD player to the
CONTROL OUT jack of the amplifier. This will enable the CD player
tobe controlled using the remote control unit supplied with the stereo
amplifier. If you do not plan to use this feature, it is not necessary to
connect CONTROL IN/OUT jacks.
@
The contro! cord is supplied with the CD player.
@
The remote control unit supplied with the amplifier can be used to
control Play, Stop, Pause and Track Search.
@
For instructions regarding connections and operation, refer to the
Operating Instructions provided with your stereo amplifier.
NOTES:
@
When a control cord is connected to the player's CONTROL IN
jack, direct control of the player with the remote control unit is
not possible.
Operate the player with the remote control unit
by aiming it at the amplifier.
@
Be sure to connect both of the control cord's plugs securely to
the CONTROL IN and CONTROL OUT terminals. Do not connect
only one end of the cable.
@
8e sure to turn off the power of the amplifier when connecting
the power cord and output cord.
@
When only the digital output is connected, the remote sensor of
the amplifier does not function. To operate it, connect the output
cable to the stereo amplifier as well as connecting the digital
output.
CONNECTING THE POWER CORD
Connect the power cord to a household AC wall outlet or an AC outlet
on your amplifier. (See the section "AC power cord connection and
functions" on page 4.)
@
Make sure plugs are inserted fully into the jacks and wall outlet.
5
<PRB1171>
En