Whirlpool WT9BTABC Посібник - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник для Вентиляційна витяжка Whirlpool WT9BTABC. Whirlpool WT9BTABC 19 сторінок.

Друкувати сторінку
Whirlpool WT9BTABC Посібник
 Press
mid speed and the LED display will show "2".
 Press
high speed and the LED display will show "3".
 When the hood is operating, you can press
→mid → high → low → mid......"
3.
Lights On / Off:
 Press
again to turn the lights off.
 The lamp function can be operated individually without switching on the power.
4.
Auto Clean / Delay Off:
Auto Clean:
 Press
 Press
 If auto clean function is being turned on when the hood is operating, hood will stop the current
operation and start auto clean function.
 When the hood is performing auto clean function, turning on or adjusting fan speed will stop
the auto clean job.
 Every time when auto clean function is activated: hood will heat up for 9 mins, and the motor
will work at high speed for 1 min before switching off. Meanwhile, the hood will exit heat auto
clean function and indicator light will be off.
Warning: When the cooker hood is operating the heat auto clean function, do not touch the
fan drum or the heating parts to avoid burns.
Delay Off:
 Delay function can only be used when the cooker hood is operating. (Cannot be used at standby
mode or only with the light on).
 Press
9 mins then switch off automatically,
 Press and hold
above steps can be repeated. When delay function end, speed and light will be turned off.
button again when it is working at low speed, cooker hood will switch to operate at
button again when it is working at mid speed, cooker hood will switch to operate at
button, to turn on the lamp, backlight of this button will be on. Press
button once, icon indicator will light up, heat auto clean function is activated.
button again will exit the function, indicator light will turn off.
button and hold for 5 second to start the delay function. Hood will keep operate for
button again, to turn off delay function, indicator light will be off. The
button to change the speed circularly: "low
button will flash during delay function is on.
12
button