ALcom Eink ACeP ePaper Стандарти Посібника користувача - Сторінка 16

Переглянути онлайн або завантажити pdf Стандарти Посібника користувача для Монітор ALcom Eink ACeP ePaper. ALcom Eink ACeP ePaper 20 сторінок. 13.3

0. get_device_info

User can get device information about resolution and firmware version.

1. display E-Ink Logo

ACeP panel will display E Ink logo to test host and TCON board connection

correctly.

2. Clear EPD (Init mode, wf mode0)

ACeP panel will be cleaned by initial mode and WF mode0.

3. mailbox_pwr_ctrl

Control power signal by inserting "1" to power on and inserting "0" to

power off.

4. mailbox_set_EPD_pwr

Insert VCOM value (unit: mV) and insert opcode to choose writing location.

5. force_set_temperature

Insert "0" to get real temperature.

Insert "1" to set temperature and insert target temperature value.

6. Firmware Update

Input a specific path of firmware file to update firmware. When firmware

upgrade done, please reset TCON board and execute "dpy_ACeP" again.