Xerox DocuPrint C3055 Посібник з налаштування - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з налаштування для Аксесуари для принтерів Xerox DocuPrint C3055. Xerox DocuPrint C3055 33 сторінки. Internal hard disk
Також для Xerox DocuPrint C3055: Посібник з монтажу (8 сторінок), Посібник з монтажу (16 сторінок), Посібник з налаштування (20 сторінок), Посібник з монтажу (16 сторінок)

1.3

Paper Eject Function

This section explains the paper eject function of the printer.

In the ESC/P emulation mode, the printer does not eject a job unless it receives a full page

worth of data. When the host interface is Parallel or USB, and if only a portion of a page is

received, the printer does not eject the page. The printer waits for the data and shows [Data

Wait] on the display until the time set under [Time-out] elapses.

In such situation, you can forcibly print the page without waiting for the time-out period to

elapse.

Use the following steps when forcibly ejecting the data remained in the printer.

Note

• If you send a job to the printer while the display says [Data Wait], the job may not be printed successfully.

Send a job to the printer after forcibly ejecting the current job or after the time-out period has elapsed.

Refer to

• For information about the [Time-out] feature, refer to the 'User Guide'.

Press the <Eject/Set> button when the

display is in the state shown on the right.

The printing starts.

When the printing is finished, the display

reads [Ready to print].

Important

• When [Print Mode] (common menu) is set to [Auto],

you cannot force-eject a job since the display does not

show [Data Wait].

1 Using Emulation

<Eject/Set> button