Xerox Color 550 Посібник із швидкого старту - Сторінка 18

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Програмне забезпечення Xerox Color 550. Xerox Color 550 25 сторінок. Xerox printer accessories product brochure
Також для Xerox Color 550: Посібник користувача (5 сторінок), Технічна специфікація (2 сторінок), Технічні характеристики (2 сторінок)

Integrated Fiery Color Server

Service

CONFIGURATION TRAINING GUIDE

Follow standard ESD (electrostatic discharge) precautions while

working on the internal components of the Integrated Fiery Color

Server.

LED diagnostic codes

To Access and Open the Fiery

Checking Integrated Fiery Color Server Internal

Connections

For the procedures to Check the Integrated Fiery Color Server

Internal Connection, consult the Integrated Fiery Color Server for

Xerox Color 550 Production Printer Installation and Service Guide

Series for Xerox Color 550 Production Printer, Service Procedures.

This includes the following sections:

During startup, the Fiery advances through a standard

diagnostic sequence. Each diagnostic code flashes rapidly on

the LED display during this sequence until the Fiery reaches

Idle. At Idle, the LED display shows the 00 code, indicating that

the Fiery is in normal operation mode.

1. Make sure that the Fiery Controller is not receiving,

processing, or printing any jobs.

2. Power off the Fiery Controller by moving the Fiery

Controller power switch to the OFF (O) position.

3. Make sure the copier is not in use, and power off the copier

using the main power button on the left.

Wait for the Fiery Controller and copier to power off

completely. The Fiery Controller LED display turns off when

the Fiery Controller finishes powering off.

4. Remove all external cables from the Fiery Controller

connectors.

5. Place the Fiery Controller on an antistatic surface.

Position the Fiery Controller so that the four mounting tabs

rest flat against the antistatic surface.

To Check Cable Connections

7/09

SERVICING

3-5