Yamaha Acoustic Посібник з монтажу - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з монтажу для Музичний інструмент Yamaha Acoustic. Yamaha Acoustic 11 сторінок. Yamaha acoustic guitar-accessory: supplementary guide
Також для Yamaha Acoustic: Посібник користувача (1 сторінок), Посібник користувача (35 сторінок), Додатковий посібник (32 сторінок)

Друкувати сторінку

Setup the Sound Editor

After installation of the drivers and Sound Editor for MAGICSTOMP is

complete, follow the steps below to start the Sound Editor and make the

appropriate settings.

Setting up OMS

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

1 Use a USB cable to connect the USB terminal of the computer (or the USB

hub) to the USB terminal of the MAGICSTOMP and turn the

MAGICSTOMP's power on (connect the power adaptor).

2 Start the computer.

3 Open the "Opcode" → "OMS Application" folders, then in the "OMS Setup

for Yamaha" folder double-click on the "USB-MAGICSTOMP" studio

setup ﬁle to start the OMS Setup.

The "USB-MAGICSTOMP" ﬁle was copied to your computer's hard

disk in the procedure on page7. If the ﬁle has not been copied to your

computer's hard disk, follow the step 7 described on

System (OMS) 2.3.8" on page 7.

After starting the OMS Setup, the Studio setup ﬁle double-clicked in step

3 opens.

Indicates this setup is available

If "

" is not indicated at the right of the setup ﬁle name, select

"Make Current" from the "File" menu and execute the save

operation.

The OMS studio setup has been completed.

After the OMS studio setup above has been completed, your

computer will recognize only the MAGICSTOMP as a MIDI

instrument. If you use another MIDI instrument in addition to the

MAGICSTOMP or you add a second MAGICSTOMP to the existing

system, you should create an original Studio Setup ﬁle. For details,

refer to the on-line manual supplied with the OMS.

The included OMS studio setup ﬁle may not function even if you

follow the above procedure, depending on your Macintosh/Mac OS

version. (MIDI data cannot be transmitted/received even if the setup

becomes available.)

In this situation, connect your Macintosh to the MAGICSTOMP via

the USB cable and follow the procedure below to re-create the setup

ﬁle.

1 Start OMS Setup and select "New Setup" from the "File" menu.

2 The "OMS Driver Search" dialog appears. Remove the check from

the "Modem" and "Printer" check boxes, and click [Search] to

execute the device search.

If the Search operation has been completed successfully, the [USB-

MIDI] device is displayed in the OMS driver setting dialog.

Open Music

and copy the ﬁle to you hard disk.

3 Click the [OK] button to search for ports. Port 1, Port 2 ... appears

in the dialog. Mark the appropriate checkbox of the port and click

the [OK] button to store the setting.

Setting up the Sound Editor for

MAGICSTOMP

1 Open "Chooser" from the Apple Menu, then open and disable "Apple Talk".

If Apple talk is active, an alert will appear when the Sound Editor

starts. If so, select "Set to OFF". It will take some time for Apple Talk

to be disabled.

2 In the "Sound Editor for MAGICSTOMP E" folder on your hard disk,

double-click on the "SoundEditorForMAGICSTOMP" icon.

3 The Sound Editor for MAGICSTOMP application starts up.

4 From Sound Editor for MAGICSTOMP's "MIDI" menu, select "OMS Port

Setup". The "OMS Port Setup" dialog box appears.

5 In the following example, the MAGICSTOMP is the MIDI device and its

settings are applied to OMS.

Keyboard Thru.............Set to OFF (no check)

MIDI In .........................Select " MAGICSTOMP 1'

MIDI Out ......................Select " MAGICSTOMP 1'

6 Click "OK" to close the dialog box.

With this setup is complete and the Sound Editor for MAGICSTOMP is ready to

use. These settings are saved when you quit the Sound Editor for

MAGICSTOMP so the next time you start the application setup is not required.

SOFTWARE for MAGICSTOMP

Installation Guide