Yamaha AX-496/396 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Yamaha AX-496/396. Yamaha AX-496/396 17 сторінок. Yamaha stereo amplifier owner's manual

Друкувати сторінку

NOTES ABOUT THE REMOTE CONTROL

Battery installation

Since the remote control will be used for many of this unit's

control operations, you should begin by installing the

supplied batteries.

1. Turn the remote control over and remove the battery

compartment cover by sliding it in the direction of the

arrow.

2. Insert the batteries (AA, R6, UM-3 type) according to the

polarity markings on the inside of the battery

compartment.

3. Close the battery compartment cover.

Battery replacement

If you notice that the remote control must be used closer to

the main unit, the batteries are weak. Replace both

batteries with new ones.

Notes

● Use AA, R6, UM-3 batteries.

● Be sure the polarities are correct. (See the illustration

inside the battery compartment.)

● Remove the batteries if the remote control is not used for

an extended period of time.

● If batteries leak, dispose of them immediately. Avoid

touching the leaked material and contact with clothing,

etc. Clean the battery compartment thoroughly before

installing new batteries.

Remote control operation range

Remote control

sensor

Notes

● The area between the remote control and the main unit

must be clear of large obstacles.

● Do not expose the remote control sensor to strong

lighting, in particular, an inverter type fluorescent lamp;

otherwise, the remote control may not work properly. If

necessary, position the main unit away from direct

lighting.

REC OUT

TAPE

TUNER

PHONO

AUX

Within approximately

6 m (19.7 feet)

E-