Yamaha DP-U50 Посібник з налаштування - Сторінка 43

Переглянути онлайн або завантажити pdf Посібник з налаштування для Підсилювач Yamaha DP-U50. Yamaha DP-U50 47 сторінок. Personal sound processer
Також для Yamaha DP-U50: Посібник з експлуатації (46 сторінок), Посібник з експлуатації (46 сторінок)

Друкувати сторінку

ADVANCED OPERATION

Setting adjustment on the Setup panel

When you click SETUP of the Main Panel, the Setup panel appears, allowing you to perform the following settings.

Edit Names of Input Sources

You can assign a name consisting up to seven characters

to each input source. For example, if a tape deck is

connected to the AUX 1 terminals, you can change the

name, AUX 1, to TAPE. As this name change information

is sent to the main unit, the display on the main unit

changes accordingly.

Volume Settings

USB Mix

When USB Mix is on, even if signals received at input

terminal(s) other than the USB terminal when it is

selected, you can mix the input signals from that

selection with the signals from the computer via the

USB connection and play the mixed signals. For

example, while you are listening to music from the tape

deck connected to AUX 1, mail arrival beeps and

warning beeps are also available.

Clicking the check box to enter the check mark in the

box will turn on the USB Mix. This status allows you to

adjust the volume level of the signals from the USB

connection. (As this adjusts the volume balance

between the selected input signals and the input signals

from the USB connection, it does not affect the volume

when USB is selected by the input selector keys.)

Clicking the check box to delete the check mark will turn

off the USB Mix. In this status, the signals from the USB

connection can be played only when USB is selected by

the input selector keys.

Maximum Volume Setting

When adjusting the volume on the Application Software,

you may inadvertently turn up the volume too high. To

avoid this, you can use this function to set a maximum

volume for the Application Software.

Digital Volume Setting

This allows you to digitally turn up and down the volume

in the DSP. Take care not to turn up the volume when

the level of the digital input signal is high as it may

cause sound distortion due to digital processing. If

sound distortion occurs, turn down the volume.

E-

USB Setting

USB Multi-Channel Setting (for Windows only)

This allows you to select the number of channels for

sending playback signals via the USB connection from

two, four, and six channels. (Note that you cannot

record signals from the USB connection on the

computer when six channels are selected.)

Custom Keys

Skin Selection

This allows you to select the skin (the design of the

background picture of the Application Software) from

several preset patterns.

Setting Remote Control Custom keys

This allows you to store a set of commands (input

selector, sound field program, volume setting, etc.) to

each of the A, B and C keys on the remote control. After

storing, simply pressing each key will execute the

stored command.

Note

The screen design, functions, etc. are subject to change

due to software upgrades. For details, refer to the

Online Help of the Application Software.