Zanussi ZTM 6825 Інструкція з експлуатації - Сторінка 24

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Посудомийна машина Zanussi ZTM 6825. Zanussi ZTM 6825 26 сторінок.

Fitting the vapour protection

Screw the vapour protecting strip onto the front

part of the worktop using four 3.5 x 16 screws.

Fitting the sealing strips to the sides

of the appliance

To ensure closer contact with adjacent kitchen

units, fit the plastic sealings strips down both sides

of the front of the machine before inserting it into

the recess.

To prevent the dishwasher tilting, it must be

secured to either the worktop or adjacent kitchen

cabinet/wall using the brackets supplied. Insert the

two fixing brackets into the slots provided in the top

front part of the dishwasher as shown in the figure.

Secure the brackets to adjacent units with the 3.5 x 16

screws using the upper or the side holes.

The appliance must be secured to the

underside of the worktop using the brackets

provided.

Failure to do this could cause damage or

injury.

When the dishwasher door is correctly balanced it

will remain in position when left ajar. The door

balance may need to be adjusted when the decor

panel is fitted. Turn the screws until the correct

balance is reached:

- heavy panel - turn clockwise

- light panel - turn anticlockwise

After the adjustment of the door balance, cover the

screw holes with the two plugs supplied with the

machine.

II25

II23

II54

II47

6 0 0 m m

II68

PFI10GB