Zanussi MC 20 MB Інструкція із застосування та догляду - Сторінка 11

Переглянути онлайн або завантажити pdf Інструкція із застосування та догляду для Кухонні плити Zanussi MC 20 MB. Zanussi MC 20 MB 23 сторінки. Mixed fuel cookers
Також для Zanussi MC 20 MB: Інструкція з використання та догляду (23 сторінок), Інструкція з використання та догляду (23 сторінок)

Друкувати сторінку

Digital clock/analogue

programmer

(Fig. 4)

This programmer enables you to switch

the oven on and off at pre-set times

without the need for you to be in

attendance. Most foods cook well

automatically, but preference should be

given to those which will not be affected

by the waiting period before the oven

comes on. The programmer also

incorporates a time of day clock.

Important

For the oven to function, dial 5 should

show the same time as the time on the

clock.

To set the clock

By turning knob 1 clockwise you can set

the correct time of day. It will be

necessary to do this on installation of the

appliance, after a power failure or when

the clock is fast or slow.

Remember to re-set dial to read the same

time as the clock, to do this depress and

turn knob 3.

Manual operation of oven

First ensure that the hand symbol \IllJ is

displayed on dial 4, if it is not, turn knob

2 clockwise until the hand is centred on

dial 4.

Secondly, make sure that the time shown

on dial 5 coincides with that of the clock.

If it does not, correct it by depressing

and turning knob 3 clockwise or

anticlockwise.

Place the food to be cooked into the oven

and set the oven and thermostat control

knobs to the required settings.

Semi automatic cooking

Manual cooking start - Automatic

cooking stop

You may wish to put something in the

oven before going out and programme

the oven to stop cooking before your

return.

Place the food to be cooked into the oven.

Turn knob 2 clockwise to set the required

duration of cooking time on dial 4

(maximum of 210 minutes).

Turn the oven and thermostat control

knobs to the required setting. When the

pre-set cooking time has elapsed, the «0»

symbol will be centred on dial 4, the oven

Fig. 4